BGM TEST BIKE Seat Grey Seams

BGM TEST BIKE seat Grey seems for Lambretta LI, SX, TV, DL, GP

Stylish BGM PRO sports seat that combines the Ancilotti and slope styles. Suitable for Lambrettas of series 1-3, Li, LiS, SX, TV, DL, GP. A longitudinally stitched seat surface, grey piping and harmonious integration into the vehicle silhouette make the BGM a real eye-catcher.

Fitting instructions

• Please remove the old seat, the air scoop and the seat retaining plate first.
• Detach the hinge plate of the BGM longtail seat from the seat.
• Fit the two fastening screws with two nuts.
• Thread the hinge plate of the BGM Longtail seat bench into the holes of the fastening bolts.
• Insert the fastening screws together with the hinge plate through the front mounting points in the frame and pre-assemble using loose nuts
  .
• Now reconnect the BGM longtail seat to the hinge plate (end-tight).
• The air gap between the seat and frame can now be adjusted using the adjusting nuts to prevent contact damage when opening the seat
  .
• Fit the fastening screws end-tight.
  
  

As the BGM Longtail seat has no mechanical locking mechanism at the rear of the frame, but is held in position by a very strong magnet, it is recommended that the contact point to the magnet on the vehicle frame is covered with a sticker, for example, to protect the valuable paintwork.