11T front sprocket (non-original size) for Lui Vega Cometa 75cc Casa part no X29d
12T front drive sprocket for Lambretta J50 + Lui 50cc models (for re-gearing when tuning). This is the...
12T front sprocket (non-original size) for Lui Vega Cometa 75cc Casa part no x29e
X28 13T front drive sprocket for Lambretta J50 + Lui 50cc models (for re-gearing when tuning). Casa X28...
13T front sprocket (original size) for Lui Vega Cometa 75ccCasa part no m257
14T front sprocket (cush drive type) for Lambretta Lui Vega Cometa + J. Casa Lambretta M343
15T front drive sprocket for Lambretta J + Lui models (for up-gearing when tuning). This is the complete...
15T front sprocket (cush drive type) for Lambretta Lui Vega Cometa + J. Casa X29B 45T Clutch crown wheel...
16T front sprocket (cush drive type) for Lambretta Lui Vega Cometa + J. Casa Lambretta X29B
Horn 6V AC (NO battery model) for Lambretta S1 + S2 (model 125-150cc product from 1959 to 1960) + J50...
0.5mm base gasket for Lui, Vega and J... Casa Lambretta
Cable adjuster block for Lui, Vega, Cometa and J...
Cable adjuster for Lui Vega Cometa and J, non original type using a10mm spanner for the locking nut and...
Cable adjuster for Lui Vega Cometa.. Casa L137
Cable adjuster rubber cover for Lui, Vega and Cometa Casa L128
Cable set for J50s, but fits all J .. made in Italy by Casa Lambretta Casa L127
Long cable trunnion for Lui, Vega, Cometa and J.. CASA L132 Please note, these are sold individually
Short cable trunnion for Lui, Vega, Cometa and J.. CASA L133
Dellorto 19mm PHBG carb & inlet manifold (PHBG) for all CPONE35 (135cc) + CPONE05 (105cc) this is a Dellorto...
80cc cylinder kit for Lui 50 and a replacement for Vega 75 by Casa Lambretta. Nikasil plated cylinder...
clutch friction plate for small frame lunamaster clutches.
Gran Turismo 0.75mm side case gasket for Vega, Lui and all J range engines. Manufactured in England from...
Choke cable for J50, J100, J125, J50 Deluxe & J50 Special. Casa L153
Clutch cork set of 2 for Lui 50 & J50 Surfex made in Italy..
Clutch kit for Lui, Vega, Cometa & J.. corks, steels, springs Surfex made in Italy..
Clutch nut for Lui, Vega, Cometa & J.. Casa Lambretta 126
Bolt for holding clutch operating arm in the engine sidecasing.. If you need the special washer for this...
Clutch spider for Lambretta Cento + J125 + J125 Starstream, this is suitable for 4-plate clutch conversions....
CNC machined 3 plate clutch spider for J50, Very high quality CNC machined 3 plate clutch spider for...
Clutch thin plate for Lui, Vega, Cometa and J.. Casa M330
3.00 x 10 Continental Classic tyre. These Tyres are tubed type and speed rated to 70mph
J50 - 125 Black 9 inch to 10 inch conversion wheel rim
J50 - 125 Chrome 9 inch to 10 inch conversion wheel rim in chrome
J50 - 125 Silver 9 inch to 10 inch conversion wheel rim
J 125 (4-speed) Casa Lambretta crankshaft.Crankshaft made by CASA LAMBRETTA for Lambretta J 125 (4-speed).Width...
Crankshaft for Lui 50 J50. This is the late needle version uses B218ZZ Bearing in Casa X803 mag houses....
Shim that sits behind M217 needle roller bearing inner sleeve on the crankshaft. Lui & J CASA 909
Fibreglass cylinder head cowling for Lui Vega & J, with correct apertures ready-cut. Reinforced with...
7mm Cylinder stud 140mm long. Used for LD125, LD150, D & Adaped for Lui Manufactured from high tensile...
Cylinder stud for Lui 50, Lui 75, Vega, Cometa and J 50. Casa 905
Cable choke conversion kit for PHBG carbs for using with J series scooters..