154 product(s) found for "Engine parts, cylinder & crank"
Clutch Arm O Ring
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
Mag L Washer
L shaped washer sits inside your magneto housing and holds one of the oil seals in place....
Woodruff Key
Woodruff Key....Good quality Italian made crank shaft key, fits in the slot to locate flywheel to the...
Grease Nipple M6
M6 grease nipple ..correct shape, 8 needed for series 1 & 2 models, 6 needed for series 3 models....
Drive Side Oil Seal Plate Screw Kit
4 slot head screws (standard Innocenti) that hold the drive side oil seal plate in place. These are the...
CrankCase And End Plate Dowel
Dowel that locates the end plate to engine case and also locates the chain case to the main engine case,...
Mag Housing stud 6 x 25 st/st MB
MB mag housing stud, this stud fits in the engine case to secure the mag housing. can also be used for...
Small Mag Oil Seal Racetour
Small mag oil seal.. Fits all Series 2 & 3 but not series 1 engines. Mb RaceTour brand..
Rear Hub Plate Stud 6 x 21 st/st MB
Rear hub plate stud, this stud tholds the rear hub bearing plate. can also be used to convert a gp gear...
Short Inlet Stud 7 x 34 st/st MB
Short inlet stud. 7 x 12-10-12 x 21mm in stainless steel made by MB..
Grease Nipple, 6mm, Stainless Steel, Original spec, MB
6mm MB Stainless steel grease nipple, used on some Lambrettas on the front hub backplate, the fork links...
Piston Shim 1mm
1mm piston shim used on gudgeon pins to take up end float on standard pistons. 2 needed per piston.
Engine Mounts BGM
BGM Engine mounts sold in pairs,these fit all Lambretta engine casings - Series I, 2, 3 and Gp/Dl. Marked...
Engine Bump Stop Washer
Engine bump stop washer..this fits underneath the bump stop rubber on the engine case.
Kickstart Oil Seal Racetour
Kickstart oil seal.. Fits all Series 1, 2 & 3 engines. Mb RaceTour brand..
RT Cylinder Head Stud
Specially designed stud to be used as an upgrade on Race-Tour type cylinders to secure the head instead...
Mag Housing Sealing Plate Stud Kit
Mag housing sealing plate Stud kit. The kit includes: 2 stainless steel studs. 2 nyloc nuts. 2 wavy ...
Viton Double Lipped Drive Side Oil Seal Casa
Drive side Casa High quality Italian made VITON double lipped oilseal 33 x 50 x 6 for all Lambretta S1...
Casa Performance Seal Plate S1,S2,S3 & Gp/Dl
This is the 'SuperSeal' drive side oilseal aluminium retainer plate for all Lambretta S1 + S2 + S3 +...
Crankcase side Level Plug st/st MB
MB crankcase side level plug made in stainless steel c/w fibre washer.... fits: Series 1 Series 2 Series...
Cylinder Stud Set Rolled
160mm Cylinder stud set, made in high tensile steel Longer than standard M8 25 - 110 - 25
Drive Side Oil Seal Plate MB inc Screws
MB drive side oil seal plate including allen type fixing screws.
