\\r\\n
GUN METAL GREY with compression and rebound adjustment..16 stage adjustable front dampers. When fitting,...
Bgm polished stainless steel split rims will fit Series 1,2,3 and Gp..
Rear hub bearing BGM with oil seal for series 1, 2. 3 & Gp.
BGM Black Edition V3 Rear Shock/Damper that is a perfect fit for all Lambretta Scooters. Adjustable ride...
12v AC/DC Voltage regulator 12V AC/DC universal regulator for all electronic 12v ignitions. The regulator...
GP Electronic Seat, this seat was fitted to the last gp200 electronic models near the end of Italian...
BGM Electronic cdi for lambretta and Vespa 12v electronic ignitions....
BGM Clutch holding tool that Holds the inner and outer clutch bell/housing so that the clutch nut can...
BGM clutch plate set of 4 cork plates for standard clutch set ups.
BGM low tension coil, this is a direct replacement coil for all Electronic stators.. Some small mods...
12v LED S3 & late S2 Rear light reflector. will also fit Dl/Gp with small modification.... WORKS AC &...
Cable set in grey made by BGM, nylon lined and teflon coated.. incudes: 2 gear cables. 1 clutch cable....
Cable inner set made by BGM.. contains the following: 2 x 2.1M inner cables with pear shaped end for...
12v This is a straight fit into: All Series 1 & Series 2 with the smaller type rear light unit (the kind...
BGM Engine mounts sold in pairs,these fit all Lambretta engine casings - Series I, 2, 3 and Gp/Dl. Marked...
Gloss Black BGM front dampers with compression and rebound adjustment..16 stage adjustment. When fitting,...
Full circle 58 X 110 Comes complete with 3.00mm cylinder packing plate for both 125-195 cc small engine...
Yamaha reed block made by BGM Please note: this willyou will need a 3mm packing plate with this reed...
MB Reed Packing Plate. TS1 reed packing plate 3mm thick, designed to be used to space out a BGM Yamaha...
Race-Tour 225 cylinder kit. includes: Alloy cylinder. 70mm Meteor piston kit. CNC cylinder head with...
Race-Tour 195 cylinder kit. includes: Alloy cylinder. 65mm Meteor CAST coated piston kit. CNC cylinder...
BGM 12v DC Regulator/Rectifier, DC TYPE (WASSELL/PODTRONICS)
Bronze clutch bush with an oil groove machined in it...
BGM "O" ring removal tool that can also be used for scribing ....
BGM fuel hose. Clear anti kink hose.... Sold by the foot or multiples of 1 foot lengths....
60 x 110 Gp Crank 60mm stroke with a 110mm con rod. Comes complete with a 3.00mm cylinder packing plate...
BGM High flow Air Filter Box System Kit LI (series 1-3), LIS, SX, TV (series 1-3), DL, GP BGM high flow...
6V regulator, for standard 6v systems with no regulator, to give steady 6v lighting....
BGM retro style front shock absorbers to be used with gaiters. These are not adjustable and are set up...
Red Edition BGM Rear Shock/Damper that is a perfect fit for all Lambretta Scooters. Adjustable ride height...
Fork spring compressor for series 1, 2, 3 & Gp that is completely easy to use on its own. Simply protect...
bgm PRO Oldie Edition (Vintage Blechdose) 2-stroke synthetic oil is a high quality 2-stroke oil. It fulfills...
16 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
17 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
18 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
BGM 19 T front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link Chain...
Silver BGM front dampers with compression and rebound adjustment..16 stage adjustment. When fitting,...
25 phbl to 26-30 phbh.. Stepped carb rubber so you can change carbs not manifolds..
BGM Bolt on top fork Damper Brackets to convert 125/150 type forks to 200 type in anodised Silver Gr...
Air Filter from BGM for Series 1 & 2 Lambrettas, it has a fine wire mesh to filter the air. It allows...
BGM Gear selector pawl set including circlips. made in Germany
BGM bolt on top fork Damper Brackets to convert 125/150 type forks to 200 type in Black....
Needle set(kit) for Dellorto PHBl carburettors, all D range.. D22, D24, D26, D27, D28, D29, D30, D31,...
125 to 147 assorted set of 6mm main jets for Dellorto carbs.. 10 main jets....
100 to 122 BGM assorted set of 6mm main jets for Dellorto carbs.. 10 main jets....
50 to 72 assorted set of 5mm jets for Dellorto carbs.. 10 jets ....
280 to 325 BGM assorted set of jets for Mikuni carbs.. 10 jets ....
PHBH assorted needle set(kit) for Dellorto PHBH carburettors, X2, X3, X4, X5, X7, X13, X25, X32, X44,...