\\r\\n
6x14 stainless steel set screw. Used to secure standard type chain adjusters.
6x16 stainless steel set screw. Used to secure standard type chain adjusters.
6x16 set screw in zink. Used to secure standard type chain adjusters.
7mm spring washer in zink various uses, end plate, exhaust and inlet studs. 6 are required for the end...
10mm E clip used for the GP clutch arm inside the chaincasing.
Gear selector arm circlip,, the one that holds the tie bar on .
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
Kickstart shaft outer circlip in stainless steel
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
Gear selector arm/tie bar Stainless steel E clip.
Kickstart piston disc, this sits in the kickstart shaft where the kickstart piston goes behind the s...
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
Kickstart outer circlip in... This circlip uses extra tags which spread the load around the outer wa...
Kickstart lever screw (Longer) & washer for non original kickstart levers.
AF 6 plate road clutch (cassette clutch) replacement fixing screw set of 5.
Dowel that locates the end plate to engine case and also locates the chain case to the main engine case,...
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
Gear selector ball bearings that fit either side of the gear selector spring in the layshaft .... SOLD...
Standard gear selector spring that fits in the layshaft ....
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
MB stainless steel shim that can be used on the gear arm, clutch arm, brake cam and the rear brake p...
0.1mm Clutch spider shim, for when using standard clutch spiders and crown wheels there is always a lot...
0.2mm Clutch spider shim, for when using standard clutch spiders and crown wheels there is always a lot...
0.3mm Clutch spider shim, for when using standard clutch spiders and crown wheels there is always a lot...
0.4mm Clutch spider shim, for when using standard clutch spiders and crown wheels there is always a lot...
0.5mm Clutch spider shim, for when using standard clutch spiders and crown wheels there is always a lot...
Kickstart lever screw nut & washer for li/tv & Sx for original type levers. For non original lever use...
1 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.25 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.5 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.75 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
3mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
IVS marked Kickstart lever screw nut & washer for li/tv & Sx for original type levers. For non original...
AF 6 plate road clutch (cassette clutch) nut & wavy washer.
Replacement Gran Turismo chain tensioner adjuster nut.