\\r\\n
BGM Superstrong clutch compressing tool to be used with part number TLM8011TL2
Tap, 3mm diameter x 0.5mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 4mm diameter x 0.7mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 5mm diameter x 0.8mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 3.5mm diameter x 0.5mm thread pitch, Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 6mm diameter x 1mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Jack for raising and supporting the engine when changing rear wheel....
8 x 1mm right hand thread fine pitch for crankshaft drive side bolt threads series 1,2,3 & Gp
Tap, 7mm diameter x 1mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 8mm diameter x 1.25mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Spark plug spanner for Lambretta S1 + S2 + S3 + DL GP + J model.
Tap, 8mm diameter x 1mm fine thread pitch for cleaning out crank. Used for cleaning/tapping threads out....
This sleeve is used with the Mb crankshaft extracting tool so It can be used to pull the drive side bearing...
BGM "O" ring removal tool that can also be used for scribing ....
Piston stop tool, universal for Lambretta & Vespa (short reach type)....
Piston stop tool, universal for Lambretta & Vespa. Plastic ebd version.
Rear brake pedal and gear selector shaft bush removal Tool.. made by mb scooters
6mm stud fitting tool. Finger screw in your stud, use some loctite on the thread to be fitted in the...
12 x 1mm Left hand fine thread for crankshaft flywheel side threads.
Tap, 10mm diameter x 1.5mm thread pitch. Used for tapping threads out when using m8 -m10 stepped exhaust...
Flywheel puller for Vespa PX, T5, Sprint, Rally, LML, P200, PK, 100 ... VESPA 100 SPORT VESPA...
Tap ratchet T handle for larger tap sizes. 5mm to 12mm tap sizes.
Clutch compressor for all models.... VESPA 100 VESPA 100 SPORT VESPA 150 GL VESPA 150 SPRINT VESPA 150...
Tap, 6mm diameter x 1mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Front and...
Tap ratchet T handle for smaller tap sizes. 3mm to 8mm tap sizes.
Double sided flywheel Extractor/Puller for all Lambretta & Vespa models..
25 Dellorto and 26/28/30mm Dellorto MB Leak down carb blank.
35mm TMX Mikunis and 34/36/39mm Dellorto VHSB MB Leak down carb blank.
MB Leak down carb blank, for tmx35, 28, 30, 32 Dellorto.
MB Leak down exhaust blanking plate ROUND type.
MB Leak down rxhaust blanking plate OVAL/BGM type.
Tool to fit the front hub/wheel bearings in and to also fit the front hub oil seals .. made by Mb Sc...
Small mag oil seal tool to drift in the small magneto housing oil seal.. made by MB scooters
Large mag oil seal tool to drift in the in board (large) magneto housing oil seal . made by MB scoot...
Flywheel Puller for all Italian and Electronic Lambretta Flywheels made in Italy
Original type spark plug spanner as supplied in the standard Innocenti tool kit for Lambretta S1 + S2...
Disposable Nitrile gloves Engineers mate (best disposable gloves available) Features: Fish Scale Type...