\\r\\n
Set of 3 shims that take up play when fitting different type ignition switches in headsets. made by ...
Wire for between speedo and temperature sensor for the SIP speedo rev counter, 1200 long.
SIP digital rev counter speedo temperature sensor...
SIP digital rev counter speedo speed sensor magnet round..
Speedo speed sensor cable for SIP digital speedo s 1350 in Length.
Light switch screws for Li,sx,special, gp and Tv series 2 and 3 in stainless steel ..... From factory,...
Mb electronic ignition mounting bracket that fits in place of the coil under the rear of the frame for...
MB small wiring loom to upgrade bgm/Scootronics/Readspeed/MB type regulator/rectifiers.
Light switch for series 3 LI AC (non battery) light switch.
DC Light switch for series 3 LI with battery. DC (battery) light switch ( 19981070 ). OSAM marked battery...
Mb Simple wiring loom to suit most models in Black. Simply plugs into each electrical component and cuts...
These rubbers fit between the mount bracket and Regulators, Rectifiers or Regulator/Rectifier.. made...
Electronic wiring loom in Black, these looms are of outstanding quality..And possibly all but as good...
Mounting bracket that fits in place of the coil under the rear of the frame for holding the cdi and regulator...
2 pin brake light switch & rubber cover. Scootopia
12v Gel Battery that will fit late series 2 and all series 3 and Gp/Dl scooters..
MB mag housing sealing kit. The kit includes: stainless steel sealing plates, gasket, spit rubber grommet,...
DC Light switch for series 3 LI with battery. DC (battery) light switch (19881040). OSAM marked battery...
Brass bullet connector set.. used for ignition switches, loom ends etc as original 4mm.
Rear tail/stop light bulb to suit all 12 volt systems including Electronic systems....
Headlight adjuster screw for SX, Tv, Lis and Gp/dl ..
Lambretta Black AC or DC, universal two part wiring loom This comes with a normal AC loom and an extra...
Earth wire/strap that goes between the fame and mag housing. made to exact original standard....
12v a/c Horn c/w fixings. For use with all electronic ignition systems.... fits series 3 & Gp/Dl..
Mag housing wire kit includes Two steel sealing plates, a gasket, a rubber grommet and fasteners...
Casa Lambretta Brake light switch rubber cover..this will fit 2 & 3 pin brake light switches including...
Horn fixing screw kit S3 & Gp/Dl. Kit Contains : 2 x Thumb Screws 2 x Rubber Grommets 2 x Stainless Steel...
Electronic wiring loom in Grey for 12v non battery electronic ignitions made in Italy Casa Lambretta....
Gp/SX/TV and Lis Light switch in Black .. Casa E72
This junction box is especially made for use with electronic ignitions. There is a small plate inside...
Electronic 12v wiring loom in grey, these looms are of outstanding quality..And possibly all but as good...
Light switch in white for SX/TV and Lis .. Casa E49