\\r\\n
16mm wavy washer for the Engine bolt and rear shock.
6x12 stainless steel set screw. .. used for Screw in fork buffers..
Zink washer that sits in your fork link to hold your spindle (and hub!) in place Two needed for drum...
Stainless steel washer that sits in your fork link to hold your spindle (and hub) in place Two needed...
Fork steering bearing top nut for searies 1,2,3, and Gp/Dl...
Fork steering bearing lock ring for searies 1,2,3, and Gp/Dl.
Top fork tab washer .. sits between the lock ring and the top bearing ring....
Front Damper top fixing bolt set in stainless steel.
Fork Top Hats/Spring stops..These fit inside the fork tubes to stop the springs from going too far..These...
Stainless steel rear nyloc nut to suit BGM rear shockers but good for all other makes too.. made by MB...
Fork buffer fixing set in stainless steel, comprising of 2 different size screws (4 for top buffers and...
Fork link 12mm half nut for fork link bolts, these are a finer pitch than the front wheel spindles and...
Fork push in buffers replacement locating plate for late Sx and Gp/Dl forks...
Fork link bolt anti shake washers in stainless steel....
Fork cable spring clip in stainless steel for speedo and front brake cables on series 3 & Gp/Dl. MB ...
Gp/Dl & Late sx push in fork buffers, two large(taller) top ones, two small(short) lower ones. Push in...
Fork Top Hats/Spring stops..These fit inside the fork tubes to stop the springs from going to far.. GP...
Fork link bolt hole repair disc, this disc repairs worn out fork boot holes that have become oval.
These are a progressive fork spring set for series 1,2 & 3 Li,Sx,Tv and Gp. sold in pairs
Fork link damper stud in stainless steel.. 7mm thread on the link side and 6mm thread on the damper mounting...
Complete screw in fork buffer refurb kit for early Lambretta Models (Li, SX150, Lis, Tv) from Mb. These...
Fork cable spring clip for speedo and front brake cables zink plated spring steel for series 3 & Gp/...
Rear shock spacer shim. these shims just offset the shock to give it a bit more clearance from the rear...
Chrome front dampers for series 3 & Gp/Dl. made by UNI
Steering/fork bearing set (top & bottom) for series 1,2,3 and Gp/Dl .
Front hub nuts for mounting shock absorbers, designed for all drum hub models. These fit all Series 1,...
Scootopia 3 Hole engine mounts (silent blocks) very high quality made by Scootopia ..sold in pairs.....
MB Push in fork buffer set for Gp/Dl and late SX.. comprising of 2 thin & 2 fat rubbers..remade to a...
Fork spring stops, remade in nylon, which go up inside the forks..
Fork link bolt set with gease nipples. These type were originally used for series 1 & 2, but can be a...
Rear shock half nut and wavy washer kit in stainless steel from MB....
BGM Black Edition V3 Rear Shock/Damper that is a perfect fit for all Lambretta Scooters. Adjustable ride...
Mb St St top fork lock washer .. sits between the lock ring and the top bearing ring....
Scootopia Front damper set for series 3 & Gp/Dl and can be fitted on series 1 & 2 if brackets are fi...
Front hub nuts for mounting shock absorbers, designed for all drum hub models. These fit all Series 1,...