\\r\\n
6x12 stainless steel set screw. .. used for Screw in fork buffers..
Fork link bolt anti shake washers in stainless steel....
16mm wavy washer for the Engine bolt and rear shock.
Zink washer that sits in your fork link to hold your spindle (and hub!) in place Two needed for drum...
Stainless steel washer that sits in your fork link to hold your spindle (and hub) in place Two needed...
Fork link 12mm half nut for fork link bolts, these are a finer pitch than the front wheel spindles and...
Top fork tab washer .. sits between the lock ring and the top bearing ring....
Front disc brake actuating arm circlip stainless steel.
Fork buffer fixing set in stainless steel, comprising of 2 different size screws (4 for top buffers and...
Fork buffer fixing set in zink coated steel, comprising of 2 different size screws (4 for top buffers...
Front Damper top fixing bolt set in stainless steel.
Rear shock spacer shim. these shims just offset the shock to give it a bit more clearance from the rear...
Fork push in buffers replacement locating plate for late Sx and Gp/Dl forks...
Fork cable spring clip for speedo and front brake cables zink plated spring steel for series 3 & Gp/...
Fork steering bearing lock ring for searies 1,2,3, and Gp/Dl.
Special stainless steel MB designed plate to stop cables been cut through unlike the older Innocenti...
Fork spring stops, remade in nylon, which go up inside the forks. These stops are double the normal thickness...
Mb St St top fork lock washer .. sits between the lock ring and the top bearing ring....
Stainless steel rear nyloc nut to suit BGM rear shockers but good for all other makes too.. made by MB...
Fork link bolt hole repair disc, this disc repairs worn out fork boot holes that have become oval.
Fork steering bearing lock ring for searies 1,2,3, and Gp/Dl...
Fork Top Hats/Spring stops..These fit inside the fork tubes to stop the springs from going to far.. GP...
Rear shock half nut and wavy washer kit in stainless steel from MB....
Steering/fork bearing set (top & bottom) for series 1,2,3 and Gp/Dl .
Fork link damper stud in stainless steel.. 7mm thread on the link side and 6mm thread on the damper mounting...
Fork spring stops, remade in nylon, which go up inside the forks..
Fork steering bearing top nut for searies 1,2,3, and Gp/Dl...
Fork steering bearing top nut for searies 1,2,3, and Gp/Dl... made by MB
Fork Top Hats/Spring stops..These fit inside the fork tubes to stop the springs from going too far..These...
Fork cable spring clip in stainless steel for speedo and front brake cables on series 3 & Gp/Dl. MB ...
Fork link bolt set with gease nipples. These type were originally used for series 1 & 2, but can be a...
Weld on Front Dampers brackets...as per original...sold in pairs..these weld on to the front forks..
MB made - top (upper) weld on damper brackets for Lambretta forks. These are slightely wider to suit...
Pair of weld-on front shock absorber damper mounting bracket. They are 5mm thick and unlike original...
Fork link bolt with half nut and shakeproof washer ST ST MB