\\r\\n
10mm circlip self coloured specifically used on the Lambretta front brake, rear brake,swivel and clutch...
10mm stainless steel circlip specifically used on the Lambretta front brake, rear brake, swivel and clutch...
12mm circlip self coloured specifically used on the brake pivots, clutch arms and rear brake pedals.
12mm stainless steel circlip specifically used on Lambretta brake pivots and rear brake pedals.....
10mm E clip used for the GP clutch arm inside the chaincasing.
Gear selector arm circlip,, the one that holds the tie bar on .
Kickstart shaft outer circlip in stainless steel
0.8 mm Shim that fits on the handle bar rod to take out any play....
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
Gear selector arm/tie bar Stainless steel E clip.
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
Kickstart outer circlip in... This circlip uses extra tags which spread the load around the outer wa...
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
Mb stainless steel shim fits on the gear pivot base beneath the swivel on standard type gear pivot bases....
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
0.5mm Handle bar rod shim that fits on the handle bar rod to take out any play....
1mm Shim that fits on the handle bar rod to take out any play....
Stainless steel washer that sits in your fork link to hold your spindle (and hub) in place Two needed...
MB stainless steel shim that can be used on the gear arm, clutch arm, brake cam and the rear brake p...
Rear Hub Cone Washer 1mm(0.9mm) Thick, in stainless steel.. made by MB
2mm Rear Hub Cone Washer/shim in stainless steel.. made by MB
Gear swivel pivot post shim & circlip set
1 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.25 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.5 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.75 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Piston circlips that are suitable for all Japanese style pistons (including Wiseco) with 16mm gudgeon...
1mm piston shim used on gudgeon pins to take up end float on standard pistons. 2 needed per piston.
3mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
Front disc brake actuating arm circlip stainless steel.
0.5mm crank shim to fit on the crankshaft between the crank and drive bearing, it will space the crank...
1.0mm crank shimto fit on the crankshaft between the crank and drive bearing, it will space the crank...
1.5 Crank shim 1.5mm to fit on the crankshaft between the crank and drive bearing, it will space the...
Casa 75 piston gudgeon pin circlip set 12mm C type (2) Malossi
0.2mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
0.5mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
1mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..