MB-5 5 Speed Gearbox (5 gears, cluster and selector)
MB-5 5 Speed Gearbox (5 gears, cluster and selector) Summary
MB-5 5 speed Lambretta gearbox, designed and tested by Mark Broadhurst.
Gearing suits all engine applications from a standard 125 to an all out 250 race engine.
Suitable for Series 1, 2, 3, & Gp
Comes with.
.5 speed 1st gear, MB-5
.5 speed 2nd gear, MB-5
.5 speed 3rd gear, MB-5
.5 speed 4th gear, MB-5
.5 speed 5th gear, MB-5
.5 speed cruciform, MB-5
.5 speed cluster, MB-5
.2 x 0.2mm cluster shims, MB-5
.1 x 0.5mm cluster shim, MB-5
.Kickstart piston, MB
50/10 1st
41/12 2nd
38/15 3rd
37/18 4th
36/20 5th
Customer Reviews
Related Products
Spring Washer 7mm Recta..
7mm spring washer in zink various uses, end plate, exhaust and inlet studs. 6 are required for the end...
Layshaft O Ring
Layshaft O ring 20 x 2, the one that fits in the groove on the layshaft that then locate in the rear...
Gear Selector Ball Bear..
Gear selector ball bearing that fit either side of the gear selector spring in the layshaft .
Gear Cluster Shim 0.2
0.2mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
Gear Cluster Shim 0.5
0.5mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
Gear Selector Spring MB
MB Gear Selector Spring. uprated gear selector spring ..gives a slightly more stiffer feel when changing...
Gear Selector Spring Ca..
Casa performance uprated gear selector spring that fits in the layshaft ....Casa X249aBETTER GEAR SELECTION...
Gear Box Shim 0.8mm Cas..
0.8mm 1st gear shim. These are especially made for RLC for use with non-standard gearbox set-ups such...
Gear Box Shim 1.0mm Cas..
1.0mm 1st gear shim. These are especially made for RLC for use with non-standard gearbox set-ups such...
Gear Box Shim 1.2mm Cas..
1.2mm 1st gear shim. These are especially made for RLC for use with non-standard gearbox set-ups such...
End Plate Bearing FAG S..
End plate bearing for series 1, 2, 3 & Gp/Dl. this is the one thats pressed into the end plate where...
Putoline ST90 500ml Gea..
Scooter Gear Oil 90 is a special transmission oil designed for Lambretta s. The product lubricates and...
Layshaft Needle Roller ..
Layshaft needle roller bearing. A high quality layshaft needle bearing. made by INA
End Plate Upgrade Stud,..
Upgrade end Plate fixing kit. 6 x xl High tensile Studs 6 x Nuts 6 x Spring washers
Gear Box 8 Shim Kit Thi..
MB precision gear shim kit. 8shims in this kit. In this kit you get a set of the thicker shims. 2.3mm...
Gear Box Shim Kit Odds MB
MB precision gear shim kit. In this kit you get a set of the odd shims. 1.5mm 1.7mm 1.9mm 2.1mm 2.3mm...
Gear Box 9 Shim Kit MB
MB 9 shim precision gear kit. In this kit you get a set of the thinner shims 1.4mm 1.5mm 1.6mm 1.7mm...
Layshaft AF 5 Speed S1,..
Close 5 layshaft 1mm longer, for series 1,2,3 & Gp, these are the layshafts that can be fitted with a...
Layshaft Bgm S1, S2 & S3
Layshaft for series 1,2,3 and Gp/Dl.bgm PRO Lay shaft for all Lambrettas of the Li family: S1 + S2 +...
MULTI-SPLINE super-safe..
Casa Performance MULTI-SPLINE super-safe layshaft axle! This has been manufactured with safety in mind...
End Plate Casa Performa..
End plate X159...Casa Performance Casa Performance Reinforced steel gearbox endplates for all Lambretta...
Octopus Rear Hub Set
This is the 'Octopus' 8 - stud rear hub + layshaft KIT ! This kit consists of the following parts: 1...
Gearbox AF 5 Speed 34T
AF 5 speed close ratio gearbox (34 Tooth 5th)..5 loose gears1 gear cluster1 gear selectorThis is the...
Gearbox AF 5 Speed 35T
AF 5 speed close ratio gearbox (35 Tooth 5th).. 5 loose gears 1 gear cluster 1 gear selector ( NEW IMPROVED...
Recently Viewed Products
MB-5 5 Speed Gearbox (5 gears, cluster and selector)
MB-5 5 speed Lambretta gearbox, designed and tested by Mark Broadhurst.Gearing suits all engine applications...
