\\r\\n
Woodruff Key....Good quality Italian made crank shaft key, fits in the slot to locate flywheel to the...
Stator wire retaining clip,,secures the wires from the stator inside the maghouse...
HT grommet that fits on the frame leg that the HT lead passes through....
Mag Housing Sealing Plate Gasket that sits on the top of the magneto housing under the wire sealing ...
BGM li/sx/ flywheel nut. ONLY SUITABLE FOR LI/SX TYPE FLYWHEELS
Vape flywheel fan fixing screw. Hex (allen Key) type screw that can be used to secure the vape flywheel...
Cdi for 12v electronic ignition with red casing Also fits Vespa..
GP 12v Electronic Flywheel to fit Gp Type Crank shaft, short fin type. weighing approx 2600g
Mag sealing plate stud long nut in stainless steel...
Flywheel anti vibration grommets made to original specifications by Scootopia ..these have a very nice...
Flywheel wavy washer that fits behind the flywheel nut securing the flywheel to the crank for gp fly...
Flywheel wavy washer that fits behind the flywheel nut securing the flywheel to the crank for li/sx/tv...
Triangular HT Lead/cable rubber grommet....
Voltage regulator Multi plug adaptor for bgm style regulators.
This junction box is especially made for use with electronic ignitions. There is a small plate inside...
Electronic 12v wiring loom in grey, these looms are of outstanding quality..And possibly all but as good...
Cdi Rubber protection cover (small type) for Ducati, BGM, SIL type CDI units. Suitable for Vespa or Lambretta....
Vape Static (road) ignition Cdi for both AC and DC types of Lambretta Vape road Ignition Systems
Earth wire, short copper earth strap for series 1 & 2 rear lights...
Ducati Flywheel dust cover marked as original, Later type..This will fit most 4 and six pole flywheels,...
Regulator Rubber Cover. Fits all Lambretta & Vespa 3 and 5 pin regulators.
MB mag housing sealing kit. The kit includes: stainless steel sealing plates, gasket, spit rubber grommet,...
MB Stator Plate Wiring Clip/clamp. Stator wire retaining clip,,secures the wires from the stator to the...
12v AC/DC V4.5 stator plate. This is stator will run both DC & AC ignition systems Works with BGM Rectifiers...
Set of 3 screws used to hold the stator in place instead of bolts(allen key type). the advantage is more...
Triangular HT Lead/cable rubber grommet....This rubber fits on your frame and secures the standard throttle...
AC Variable Ignition Kit DL/GP type crank fitment Flywheel 2200g, 12V, AC with optional 12v DC Variable...
BGM electronic cdi in BLUE comes with ht cap and ht lead ....
Electronic wiring loom in Black, these looms are of outstanding quality..And possibly all but as good...
12v electronic cdi in RED comes with ht cap and ht lead ....
MB rubber cover for BGM Regulator/Rectifiers, purpose made rubber cover made by MB scooters.... price...
CDi Rubber Cover. Fits electronic cdi coils from BGM, Af, Piaggio, Ducati and all Pattern versions.
Flywheel dust cover early type as original..Ducati marked .. This will fit most 4 and six pole flywheels,...
Electronic wiring loom in Black, AC simple wiring loom from BGM
BGM 12v DC Regulator/Rectifier, DC TYPE (WASSELL/PODTRONICS)
12v AC/DC Voltage regulator 12V AC/DC universal regulator for all electronic 12v ignitions. The regulator...
BGM Vintage Electronic cdi/coil for lambretta 12v electronic ignitions. BRACKET FOR COIL TL5147
MB CDi Rubber Cover. Fits electronic cdi coils from BGM, Af, Piaggio, Ducati and all Pattern versions....
Electronic ignition Cdi mounting bracket for series 1 & 2, to fit standard type cdi s
Earth tab that fits under one of the maghousing sealing plate screws for an extra earth point.
12v AC/DC Voltage regulator 12V AC/DC universal regulator for all electronic 12v ignitions. The regulator...