\\r\\n
7mm spring washer in zink various uses, end plate, exhaust and inlet studs. 6 are required for the end...
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
6x16 stainless steel set screw. Used to secure standard type chain adjusters.
Gear selector arm circlip,, the one that holds the tie bar on .
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
MB Clutch plates 1.0mm thick .. Sold individually. 3 needed for standard set ups. 4 needed for 5 plate...
Gear selector arm/tie bar Stainless steel E clip.
6x14 stainless steel set screw. Used to secure standard type chain adjusters.
6x16 set screw in zink. Used to secure standard type chain adjusters.
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
Kickstart lever screw nut & washer for li/tv & Sx for original type levers. For non original lever use...
Gear selector ball bearings & standard spring that in the layshaft ....
Casa performance uprated gear selector spring that fits in the layshaft .... Casa X249a
Dowel that locates the end plate to engine case and also locates the chain case to the main engine case,...
Clutch plates 1.2mm thick .. Sold individually. 3 needed for standard set ups. 4 needed for 5 plate set...
Gear selector fork M6 screw but with a smaller head, so you use a 9mm socket instead of a 10mm that you...
Gear selector ball bearings that fit either side of the gear selector spring in the layshaft .... SOLD...
Clutch quadrant that fits inside the side casing and either presses on the clutch nipple (Li, Sx, Tv)...
Chain/Crankcase side case Gasket Bgm silicone type....
1.2mm Clutch plate steel. for series 1, 2, 3 & Gp. made by BGM.
kickstart rubber in Blue for series 1,2,3 & Gp/Dl.. Casa C86b
1.25 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.5 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Sx,Tv and Li series 1,2 & 3 clutch pressure/bell Thimble...
Kickstart shaft outer circlip in stainless steel
1.75 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
0.2mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
0.5mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
MB stainless steel shim that can be used on the gear arm, clutch arm, brake cam and the rear brake p...
Kickstart lever screw (Longer) & washer for non original kickstart levers.
Kickstart Bushes, Chaincase/side case inner & outer bush set(fits where kickstart shaft goes) in bra...
Gear Selector "sliding dog" made by Casa Lambretta in Italy .. for series 2, 3 & Gp/Dl engines.... excellent...
IVS marked Kickstart lever screw nut & washer for li/tv & Sx for original type levers. For non original...
Clutch arm spring..fits on clutch arm on chain case in stainless steel made by Mb Scooters..
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....