\\r\\n
20 Tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
Cable set in grey made by BGM, nylon lined and teflon coated.. incudes: 2 gear cables. 1 clutch cable....
Oil bottle or Luggage carrier that fits in the inside legshield spare wheel holder.
BGM Engine oil seal set for all series 2 & 3 Lambretta li/sx/tv/gp- Includes small and large mag side...
BGM 12v DC Regulator/Rectifier, DC TYPE (WASSELL/PODTRONICS)
Cable set in black made by BGM, nylon lined and teflon coated.. incudes: 2 gear cables. 1 clutch cable....
BGM electronic cdi in BLUE comes with ht cap and ht lead ....
12v electronic cdi in RED comes with ht cap and ht lead ....
Racing red superstrong clutch cork set of 5 each cork is 2.5mm thick. BGM8005R
Assembly and disassembly tool for gear selector. Tool for fitting the gear selector on the layshaft on...
Silver split rim wheel, made by BGM.. will fit Series 1,2,3 and Gp..
White split rim wheel, made by BGM.. will fit Series 1,2,3 and Gp..
Rear hub bearing BGM with oil seal for series 1, 2. 3 & Gp.
19 tooth front sprocket.. made by Mb. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46...
12v AC/DC Voltage regulator 12V AC/DC universal regulator for all electronic 12v ignitions. The regulator...
Fast flow fuel tap for series 1,2,3 & GP .. OMG made in Italy
6V regulator, for standard 6v systems with no regulator, to give steady 6v lighting....
4 plate upgrade set for standard 4 plate clutch set ups, Suitable for all conventional standard clutch...
Clutch spring aligning tool BGM superstrong clutches.
BGM Electronic cdi for lambretta and Vespa 12v electronic ignitions....
BGM clutch plate set of 4 cork plates for standard clutch set ups.
BGM low tension coil, this is a direct replacement coil for all Electronic stators.. Some small mods...
Electronic wiring loom in Black, AC simple wiring loom from BGM
Electronic wiring loom in Grey, AC 12v simple wiring loom from BGM
Bgm complete cable adjuster & trunnion set.. kit includes the following 3 x cable brass trunnions (1...
75 to 98 assorted set of 5mm jets for Dellorto carbs.. 10 jets. 75, 78, 80, 82, 85, 88, 90, 92, 95, ...
PHBL 22-25 Flange type carb rubber to suit all Dellorto PHBL carbs 22 - 25mm, Fits 36mm spigot outside...
BGM Spark Plug socket Knurled finger grip to remove plug when hot 13mm Hexagon head so you can use a...
Air Filter from BGM for Series 1 & 2 Lambrettas, it has a fine wire mesh to filter the air. It allows...
6v LED rear light that fits all Series 1 & Series 2 with the smaller type rear light unit (the kind that...
12v This is a straight fit into: All Series 1 & Series 2 with the smaller type rear light unit (the kind...
12v LED S3 & late S2 Rear light reflector. will also fit Dl/Gp with small modification.... WORKS AC &...
PHBH 26, 28, 30 Flange type carb rubber to suit all Dellorto PHBH carbs 26, 28, 30mm, Mikuni 30mm and...
BGM Clutch holding tool that Holds the inner and outer clutch bell/housing so that the clutch nut can...
Clutch plate steel set 1.2mm thick as original .. sets of 3 for standard set ups made by BGM.
Clutch plate steel set 1.5mm thick as original .. sets of 3 for standard set ups made by BGM.
PHBL 25 Carb mounting rubber for 25mm Dellorto PHBL carbs. made by BGM
BGM Clubman standard oval type exhaust manifold.
TS1 BGM Clubman round ts1 type exhaust manifold...
Needle set(kit) for Dellorto PHBG carburettors, all W range.. W3, W4, W5, W6, W7,W8, W9, W10, W11, W12,...
100 to 122 BGM assorted set of 6mm main jets for Dellorto carbs.. 10 main jets....