\\r\\n
MB Petrol tank cap rubber seal for all standard Lambretta fuel tank caps in viton....
Mb St St top fork lock washer .. sits between the lock ring and the top bearing ring....
200cc inlet Gasket that is made f rom a White High strength and fuel resistant gasket material. MB M...
Kickstart oil seal.. Fits all Series 1, 2 & 3 engines. Mb RaceTour brand..
MB oversize (m8) brake and lever pin, made by MB Scooters.... If your lever holes are oval d and worn...
Fork spring stops, remade in nylon, which go up inside the forks. These stops are double the normal thickness...
MB Stator Plate Wiring Clip/clamp. Stator wire retaining clip,,secures the wires from the stator to the...
Carb spacer ring for Mikuni tmx 35. This alloy ring fits into the mounting rubber first, then fit the...
Special stainless steel MB designed plate to stop cables been cut through unlike the older Innocenti...
MB Gear and clutch trunnion, this is a universal long type in st/st it comes with a small disc that goes...
2.0 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
MB Fuel tank strap trunnion series 1 & 2 in stainless steel.
MB stainless steel 8mm grease nipple used on some Lambrettas on the front hub (the turning part)....
Throttle and gear roller olive bush support clamp in stainless steel.... Two required per handle bar......
Headset (handlebar) Fixing kit for series 2 in stainless steel.. MB Product
MB Stainless steel Handlebar gear support steel L washer for series 3 & DL/GP.
1.2 Clutch shim..MB precision clutch shim remade in hardened shim steel....
7mm to 6mm oversized stepped stud to repair a damaged 6mm crankcase side in stainless steel.
6mm MB Stainless steel grease nipple, used on some Lambrettas on the front hub backplate, the fork links...
1.4 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.7 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
End plate stud that is made longer one end (the end that locates in the engine casing) to give better...
0.9 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.1 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
MB Headset cable guide in stainless steel for series 1,2,3 and Gp/Dl, these hold the Front Brake and...
1.5mm Magneto house gasket for series 1, 2, 3 & Gp/Dl. made by Mb
1.8 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
Inlet manifold screw in stainless steel bolt inlet manifolds with larger carbs. This bolt is designed...
Speedo retaining plate in stainless steel for series 3 and spanish eibar winter models.... made by M...
125 150 175 185 and all small block inlet size cylinders inlet Gasket that is made f rom a White High...
Clutch arm spring..fits on clutch arm on chain case in stainless steel made by Mb Scooters..
0.8 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.0 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.3 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.5 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.6 mm Clutch shim. MB precision clutch shim remade in hardened shim steel.
1.9 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
MB extra strong throttle spring for Dellorto PHBH. Improves the throttle slide shutting off even if you...
Front brake cable ferrule in stainless steal, made by Mb scooters....
Headset wiring clip/clamp that holds the cables inside the headset in stainless steel.. made by MB..
MB lazer cut kickstart shim 1.5mm thick. fits on kickstart shaft before the outer circlip.
1.75 mm MB kickstart shim in Zink.. fits on kickstart shaft before the outer circlip....
1mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
Flywheel and head cowling screw kit in stainless steel that contains the correct number of hex set screws...
Locating pin that screws in the kickstart piston, tightens up by using an allen key... made by MB..
MB Gear Selector Spring. uprated gear selector spring ..gives a slightly more stiffer feel when changing...
MB Stainless steel Handlebar gear support steel L washer for series 1,2 and late Indian GP