\\r\\n
Air hose clip that fits the bottom of the air hose bellows rubber when using a standard 18/20mm carb...
MB Clutch plates 1.0mm thick .. Sold individually. 3 needed for standard set ups. 4 needed for 5 plate...
Extra long cable adjuster screw for large carburettors made by MB scooters.. These will fit all the Dellorto...
Chain tensioner/slipper locking plate. This is used to spread the load from the two studs that hold the...
MB Fuel tank strap trunnion series 1 & 2 in stainless steel.
MB small wiring loom to upgrade bgm/Scootronics/Readspeed/MB type regulator/rectifiers.
Base gasket for all 125/150/175cc casings. Approximately 1mm thick .. made by Mb
Brake shoe post for front or rear Gp/Dl, these have groove/oilways cut into them to aid lubrication......
Brake shoe post set for front or rear Sx/Li/Tv/Lis and series 2 type brakes, these have groove/oilways...
MB brake and clutch lever pivot pin in stainless steel, made by MB scooters....
7mm to 6mm oversized stud to repair a damaged exhaust tail pipe stud thread in stainless steel...
Rear shock half nut and wavy washer kit in stainless steel from MB....
8mm to 6mm oversized stud to repair a damaged side casing tail pipe stud thread in stainless steel.....
360 degree Metal fuel banjo that turns all the way round for ease of fuel pipe routing, suitable for...
SH22 Mixture screw & spring Dellorto & Scootopia SH22 carbs.
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
MB Brake pedal return spring in stainless steel..for series 2,3 & Gp/dl...
Rear hub oil seal.. Fits all Series 1, 2 and 3 . Mb RaceTour brand..
Tap, 3mm diameter x 0.5mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
MB Cable adjuster screw complete with nut, in stainless steel. Three needed per scooter....
Standard length (390mm) choke cable in GREY . made by Mb.
Series 3 Li/Sx/Tv and Gp horncasting fixing kit in stainless steel.. MB Product
Tap, 4mm diameter x 0.7mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 5mm diameter x 0.8mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Brass cups & stainless steel spring anti rattle set that fit inside the brake or clutch levers .... made...
2.6 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
TS1 reed block gaskets..There are two different size original TS1 inlet gaskets one small and one large,...
1.2 mm Head Gasket 70mm 225 for setting correct squish.... made by Mb..
MB stainless steel strap that secures the cables to the frame.....
MB side panel spring clip brackets in stainless steel and are used to secure the W clip that holds the...
MB Large clutch retaining circlip, designed by mb scooters to be a better fit.... may need slightly grinding...
MB Dellorto O ring set made in Viton to protect your carburettor from the ethanol in modern fuels. Kit...
Mag housing stud and fixing set, these hold the mag house in place. made by MB..
MB horncasting rubber bead in BLACK. Remade & reshaped for easy fit for series 2, 3 &gp/Dl. fits between...
Grey MB horncasting rubber bead. Remade & reshaped for easy fit for series 2, 3 & gp/Dl. fits between...
Fork spring stops, remade in nylon, which go up inside the forks..
Front and rear brake adjuster barrel made in Stainless Steel, MB.
Rear frame badge holder and grill holder brackets for Series 3 scooters in stainless steel made by MB.......
2.4 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
2.9 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
Tap, 3.5mm diameter x 0.5mm thread pitch, Used for cleaning/tapping threads out. Can be used for: Series...
MB exhaust gasket for oval exhaust ports.
S1 & 2 brass bush that fits in the end of the handle bars. MB
Choke guide plate in stainless steel for all series 3 & Gp/Dl.... made by mb ..
2.3 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....