\\r\\n
AV268 atomiser for Dellorto PHBH carburettors. genuine Dellorto
3.00 float needle valve for PHBH PHBL.
53 Main Jet for Dellorto SH1/18, SH1/20, SH2/22 and Jetex Carbs. And pilot jet for phbh/phbl and some...
57 Main Jet for Dellorto SH1/18, SH1/20, SH2/22 and Jetex Carbs. And pilot jet for some 6mm Main jetted...
AV264 atomiser for Dellorto PHBH carburettors . genuine Delloro
BGM fuel hose. Clear anti kink hose.... Sold by the foot or multiples of 1 foot lengths....
25mm PHBL RUBBER MOUNTED CARB, The carb comes fully jetted with a cable choke already fitted. cable choke...
25 phbl inlet manifold to suit small block 150cc stud spacing cylinders. MB Product
Stepped carb rubber 26/28/30 phbh to mikuni tmx 35mm... made by Mb..
60 Main Jet for Dellorto SH1/18, SH1/20, SH2/22 and Jetex Carbs. And pilot jet for phbh/phbl and some...
65 Main Jet for Dellorto SH1/18, SH1/20, SH2/22 and Jetex Carbs. And pilot jet for phbh/phbl and some...
7mm spring washer in zink various uses, end plate, exhaust and inlet studs. 6 are required for the end...
7mm nut in zink which can be used for gear adjuster screws, inlet and exhaust studs....
MB Petrol tap lever adjuster/extension sleeve in stainless steel made by MB. this clever little sleeve...
Scootopia super fast flow petrol tap version 2. Designed with the internals of the tap to be much larger...
Extra long cable adjuster screw for large carburettors made by MB scooters.. These will fit all the Dellorto...
25mm PHBL Dellorto and 24mm Mikuni carburetors to 200cc type cast cylinders (200cc Race-Tour, Factory,...
Cable choke conversion for Mikuni TMX 35 Carbs .... genuine Mikuni
Replacement slide spring for a Mikuni TMX 35mm carb... genuine Mikuni
Float bowl rubber sealing ring/gasket for the Mikuni TMX 35 carb.
Float bowl rubber sealing ring/gasket for the Mikuni TMX 35 carb....
58 Needle EN11- 58 for Mikuni TMX35 carburettors.. The higher of the last two digits is the weaker needle...
EN11- 57 needle for Mikuni TMX35 carburettors.. The higher of the last two digits is the weaker needle...
Needle EN11- 56 for Mikuni TMX35 carburettors.. The higher of the last two digits is the weaker needle...
Needle EN11- 55 for Mikuni TMX35 carburettors.. The higher of the last two digits is the weaker needle...
Needle EN11- 54 for Mikuni TMX35 carburettors.. The higher of the last two digits is the weaker needle...