\\r\\n
Petrol resistant 7g Float for dellorto PH type carburettors. MB Product
Plastic replacement fuel banjo suitable for all Ph type carburettors.
Throttle cable adjuster & nut for SH1/18, SH1/20 & SH2/22 Dellorto & Scootopia carbs..
Small Block 22mm inlet manifold. Fits Dell'orto SH22 and Jetex carburettors. These manifolds can be used...
MaxiFlow mega airhose 25-26mm... Casa Lambretta X62a
NEW DESIGN! Casa Performance 'PowerFlow' internally-reinforced blue foam type airfilter for large carbs...
125 to 147 assorted set of 6mm main jets for Dellorto carbs.. 10 main jets....
PHBH Carb mounting rubber for 26-30mm Dellorto PHBH, VHSH carbs.. made by Mb.
Carburettor Sleeve Plastic Insert for Dellorto and Scootopia SH2/22 type carbs.
DELLORTO 28mm PHBH RUBBER MOUNTED CARB. pre jetted the with the following. Main jet 120 Pilot jet 55...
30mm PHBH Carb pre jetted with a bigger float valve (3.50) and cable choke. 45 slide AV266 X7 53 Pilot...
58 Main Jet for Dellorto SH1/18, SH1/20, SH2/22 and Jetex Carbs. And pilot jet for some 6mm Main jetted...
AQ266 atomiser for Dellorto PHBL carburettors. genuine Dellorto
Ethanol resistant SH float needle replacement valve for Dellorto SH18/20/22 carbs.. Scootopia Produc...
Carburettor clamp screw for dellorto SH 18, 20 & 22mm carburettors.
MB 3.50 float needle valve made with a viton tip for modern fuels for PHBH PHBL & VH
45 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
Reed block (reed valve) petals for Yamaha RD350 type reed blocks.
20mm carburettor, This is a remade version of the now discontinued Dellorto SH20 that was originally...
Air Hose Clip in stainless steel , for the top and bottom on 22mm air hoses and all hose sides that fix...
50 to 72 assorted set of 5mm jets for Dellorto carbs.. 10 jets ....
125 to 148 BGM assorted set of jets for Polini, Keihin type carbs.. 10 jets ....
7895-2 Slide for 150 models Dellorto & Scootopia carbs made by Scootopia
112 Main Jet for Dellorto SH1/18, SH1/20, SH2/22 and Jetex Carbs. And pilot jet for phbh/phbl and some...
Banjo bolt for SH1/18, SH1/20 & SH2/22 Dellorto & Scootopia carbs..
Tick over screw & spring for GP SH1/20 & SH2/22 Dellorto & Scootopia carburettors.
Ethanol resistant float for Dellorto and Scootopia made SH carbs that originally fitted series 3 and...
TS1 reed block gaskets..There are two different size original TS1 inlet gaskets one small and one large,...
Dellorto SH22 and Jetex carburettors. These manifolds are for 200cc inlet stud configuration only.
Needle EN11- 57 for Mikuni TMX35 carburettors precision made by MB scooters The higher of the last two...
Extra narrow/thin air filter 40mm deep. comes with a selection of adaptors to fit most carburettors....
22mm air hose with Ram filter & clips Will fit - Dellorto SH22, Mikuni 24/25 cARBS
32 - 34 - 36mm Rubber inlet manifold for Casa Performance SS kits SS200 + SS225 + SSR250
Flange type carb rubber to suit 34-36 Dellorto VHSB made by Mb Scooters Marked with MB Fits 44mm spigot...