347 product(s) found for "FIXINGS"
Rear Hub Nut Wavy Washer Lui Vega Cometa
Rear hub nut wavy washer, especially made rear hub wavy washer for Lui, Vega and Cometa. NOT Series 1,...
Flywheel Nut & Washer Li/Sx BGM
BGM li/sx/ flywheel nut and correct size li/sx/tv flywheel washer. ONLY SUITABLE FOR LI/SX TYPE FLYW...
BGM Inlet Manifold Flange Type Screw
BGM Flange type Inlet manifold bolt and washers. special length bolt to attatch inlet manifold to cy...
Headset Bolt, S3 & Gp ST ST
Series 3 & Gp Headset / handle bar clamping bolt & lock washer in stainless steel
Allen Cap Head Screw, 5 x 12mm, Stainless Steel
5 x 12 Cap head screw that can be used to secure the bottom of the cylinder cowling and flywheel cowl...
Split Pin ST/ST
Split pin in stainless steel for connecting petrol tap lever to the petrol tap and the rear brake pedal...
Dome Allen Cap Head Screw, 8 x 16mm, Stainless Steel
8 x 16 Dome cap head screw, in stainless steel. used for X44 chain tensioner and mb flange inlet manifolds...
Rear Lense Fixing Screws late S2 & S3 ST ST
Stainless steel Rear light lense fixing screws for late series 2 and series 3.
Front Hub Spindle Nut st/st MB
Front Spindle nut, MB new type CNC machined front spindle nut in stainless steel, designed to be used...
Rear Hub nut st/st MB
MB made Rear hub nut in stainless steel. Slightely taller than standard so can accommodate any hub/layshaft...
Roll Pin Handle Bar Rod 5 x 25mm
5mm Roll Pin, 5 x 26mm for handle bar shafts (larger hole Indian type), also used for series 3 panel...
Stand Roll Pin Sets St/st
Stand roll pins in stainless steel 6x40 set of 2.. for series 1,2,3 & Gp/Dl stabds..
Screw 4 X 12mm Hexagon Set Stainless
4 x 12 screw in stainless steel. can be used for the handlebar olive support saddle clips, mag sealing...
Rear Frame Leg Screw ST ST
Rear floor board runner support arm fixing screw for series 3 & Gp/Dl. 7x22 stainless steel screw. two...
Inlet Manifold Bolt/Screw 7 x 42mm st/st MB
Inlet manifold screw in stainless steel bolt inlet manifolds with larger carbs. This bolt is designed...
Inlet Manifold SHORTY REED Bolt/Screw 7 x 45mm st/st MB
MB shorty reed Inlet manifold screw in stainless steel.
Screw 8 x 16mm Hexagon Set stainless steel
8x16 stainless steel set screw... used for securing the head cowling..
8mm White Nyloc Wheel Rim Nut ST ST
8mm white nyloc stainless steel nut. used specifically for wheel rims
7mm Plain Nut st/st
7mm stainless steel plain nut used with gear adjusters and to hold inlet manifolds amongst other thi...
7mm Plain Nut zink
7mm nut in zink which can be used for gear adjuster screws, inlet and exhaust studs....
Raised Csk Screw 5 X 25
5 x 25 raised csk screw in stainless steel, specifically used for fixing the sharks teeth.
Rear Shock Engine Shaft Stud
Rear shock replacement pin/stud that fits on the rear of the engine to fix the rear shock to made in...
Fork Link Locating Washer MB
Stainless steel washer that sits in your fork link to hold your spindle (and hub) in place Two needed...
Airbox Bolt ST ST
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
Airbox Long Filter Bolt ST ST Mb
MB Long air filter bolt in stainless steel for securing the air filter.... for series 3 only..
Rear Light Bolt ST ST Mb
Stainless Square headed Bolt for fixing rear light unit to frame, Li/Sx/Tv/Lis Rear light units. 2 needed...
Rear Shock Half Nyloc Nut For BGM Damper MB
Stainless steel rear nyloc nut to suit BGM rear shockers but good for all other makes too.. made by MB...
Flywheel Cowling Hexagon Set Screw Kit, st/st MB
Flywheel and head cowling screw kit in stainless steel that contains the correct number of hex set screws...
Crankcase Side Stud & Nyloc Nut Set Mb
MB full set of stainless steel standard length studs with nyloc nuts and plain washers to secure your...
