\\r\\n
Speedo retaing plate screw set in stainless steel.. the 3 screws and spring washers that keep the speedo...
6mm wavy washer in stainless steel, various uses but one of the main uses is for fixing the chain case...
4mm Roll Pin, 4 x 26mm for Italian handle bar shafts.
Rear shock half nut and wavy washer kit in stainless steel from MB....
16mm wavy washer in stainless steel Amongst many applications this fastener can specifically be used...
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
Yellow number plate plastic fixing srew and nut.
Rear number/license plate holder in stainless steel for fitting number plates to Lui, Vega and Cometa.....
Black number plate plastic fixing srew and nut.
Full nut and bolt set in zink for series 1,2,3 & Gp/Dl.. Jockeys BoXenstop.
Side panel handle fixing set for series 1, 2 & 3.. inc: 2 screws 2 anti shake washers 2 nylon handle...
Side panel handle fixing set for series 1, 2 & 3.. inc: 2 screws 2 anti shake washers 2 wavy shims
Engine Bar Nuts & Wavy Washer Set in stainless steal..
Headset top screw and anti shake washer set for series 2... holds the headset top and bottom togethe...
Side panel handle fixing screw in Zink as original for series 1, 2 & 3
Side panel handle fixing screw washer for series 1, 2 & 3
Engine side case fixing kit stainless steel.. contains: m6 Nut x 14 m8 Nut x 2 m6 Wavy Washer x 14 m8...
Vape flywheel fan fixing screw. Hex (allen Key) type screw that can be used to secure the vape flywheel...
Rear floor board runner support arm fixing screw set with IVS embosed on the head and take a 14mm spanner...
Rear floor board runner support arm fixing screw set with IVS embosed on the head for series 3 li, tv,...
Kickstart lever screw nut & washer for li/tv & Sx for original type levers. For non original lever use...
6x14 stainless steel set screw. Used to secure standard type chain adjusters.
Rear Lamp Lense Screws for late series 2 and series 3 ....
Front spindle nut as original in Zink that are made to exact Innocenti drawings, two required for drum...
4 slot head screws (standard Innocenti) that hold the drive side oil seal plate in place. These are the...
Gear selector fork M6 screw but with a smaller head, so you use a 9mm socket instead of a 10mm that you...
4x80 cheese head screw in stainless steel, can be used to fit the two halves of a cdi mounting bracket...
Split pin for connecting petrol tap lever to the petrol tap and the rear brake pedal clevis pin.... Two...
Long engine bar, this fits all models with the large engine mounts.... comes with 2 nyloc nuts and 2...
Rear hub nut in zink with nyloc seal fitted inside. Rear hub locking ring. M7 cap head screw. Spring/wavey...
Legshields to mudguard fixing kit in zink for series 3 and Gp/Dl.