\\r\\n
Clutch pressure/bell Gp/Dl type..excellent quality and very well made.
Series 3 Chrome ring, Fits on the top of the fork tube between the leg shields and the bottom of the...
Chrome ring For series 2 only,Fits on the top of the fork tube between the leg shields and the bottom...
Chrome ring For series 1 only,Fits on the top of the fork tube between the leg shields and the bottom...
Dellorto made Choke refurbish kit for scootopia & dellorto SH carburettors.. Kit contains 1 x plunger,...
Choke refurbish kit for scootopia & dellorto SH carburettors.. Kit contains 1 x plunger, 1 x spring 2...
Choke lever metal cap that sits at the rear of the choke unit..for all series 3, Gp/Dl and series 2,...
Choke Lever Assembly for series 3 & Gp/Dl.. as per original.
Choke Lever Assembly for series 1 & 2 as per original....
Kickstart Bushes, Chaincase/side case inner & outer bush set(fits where kickstart shaft goes) in bra...
Top & Bottom Chain Guide Set for standard series 1, 2 & 3 Scooters.
Varitronic Cdi for 12v Scootopia varitronic electronic ignitions.
CDi Rubber Cover. Fits electronic cdi coils from BGM, Af, Piaggio, Ducati and all Pattern versions.
Cdi for 12v electronic ignition with red casing Also fits Vespa..
SH1/18 & 20 slide 5914-1 for models LI125, 150 Special, TV175, TV200 SX200 & Vega 75 will fit both Dellorto...
Carb refurb kit to fit all scootopia and 18,20 & 22mm dellorto carbs. float, bowl rubber gasket and needle...
S3 & Gp/Dl cable strap that secures the cables to the frame with holes in for grease nipples to go through,...
Cable strap that secures the cables to the frame with holes in for grease nipples to go through, for...
Friction free cable set for all series 3 with dummy grease nipples in dark grey.... made by Scootopi...
2 pin brake light switch & rubber cover. Scootopia
Front and back brake adjuster set, Li/Sx/Tv as per original... 1 PAIR
Air scoop for series 3 Gp/Dl. this has the larger internal arch (no bafles)..
Complete Series 1 & 2 air hose with clips, cup, pipe & valve.
Free fast flow air filter for all series 1 and 2.
AC Variable Ignition Kit DL/GP type crank fitment Flywheel 2200g, 12V, AC with optional 12v DC Variable...