\\r\\n
Kickstart lever screw (Longer) & washer for non original kickstart levers.
MB kickstart 4 piece shim set in zink.. comprising of. 1.0 mm 1.5 mm 1.75 mm 3.00 mm
1.75 mm MB kickstart shim in Zink.. fits on kickstart shaft before the outer circlip....
AF 6 plate road clutch (cassette clutch) nut & wavy washer.
Kickstart stop allen screw cap and spring washer.. fits inside the chaincase on later Indian Gp case...
Clutch Operating Arm that fits on chain case, made by MB.... remade in a hardened steel and hard chrome...
2.7 mm thick gearbox shim..this shim fits on top of the first gear....
2.5 mm thick gearbox shim..this shim fits on top of the first gear....
2.3 mm thick gearbox shim..this shim fits on top of the first gear....
Chaincase, Gp/Dl type, in a smooth finish latest version made from new tooling..made by UNI.. Best A...
Clutch Operating Arm that fits on chain case, made by MB.... remade in a hardened steel then zinc co...
Gear change arm & screw for li/Sx/Lis and Tv type gear shafts..
kickstart rubber in Red for series 1,2,3 & Gp/Dl CASA C86r
kickstart rubber in Blue for series 1,2,3 & Gp/Dl.. Casa C86b
Clutch arm spring..fits on clutch arm on chain case in stainless steel made by Mb Scooters..
Clutch quadrant that fits inside the side casing and either presses on the clutch nipple (Li, Sx, Tv)...
GP Top bearing pressure plate insert for AF cassette 6 plate clutch.
Chain tensioner lazer cut clamp plate & stud set This is used to hold the top chain slipper in place...
MB Front drive sprocket spring for series 1,2 & 3.... made by mb scooters..
MB Large clutch retaining circlip, designed by mb scooters to be a better fit.... may need slightly grinding...
Sx,Tv and Li series 1,2 & 3 clutch pressure/bell Thimble...
Magnetic drain, level & breather plug set with fibre washers..
Gear selector fork M6 screw but with a smaller head, so you use a 9mm socket instead of a 10mm that you...
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
Kickstart piston disc, this sits in the kickstart shaft where the kickstart piston goes behind the s...
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
High quality Clutch needle bearing.. Used as standard on Li, SX, TV models.. two needed
Gear selector arm/tie bar Stainless steel E clip.
3 Piece gear cluster bearing and bush set, comprising of: Gear cluster bearing. Bush. Shim (fits under...
Top bearing pressure plate insert LI type for AF road 6 plate clutch....
Clutch arm rod/shaft that fits inside the chain casing and the operating lever fixes to, for li,Tv,Sx...
Crankcase Breather/filler plug and fibre washer Casa B104
BGM Gear selector pawl set including circlips. made in Germany
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
10mm E clip used for the GP clutch arm inside the chaincasing.
BGM 19 T front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link Chain...
18 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
17 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...