\\r\\n
Side case oil level plug for series 1,2,3 and Gp/Dl as original.. Scootopia....
Li 47 tooth - AF 6 plate road clutch (cassette clutch), 47 tooth comes complete ready to fit with full...
Clutch springs for series 1,2,3 and Gp/Dl.. Standard type Springs .... Comes in sets of 5....
Close 5 layshaft 1mm longer, for series 1,2,3 & Gp, these are the layshafts that can be fitted with a...
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
Kickstart lever screw nut & washer for li/tv & Sx for original type levers. For non original lever use...
Magnetic Drain Plug for series 1,2,3 and Gp, Chrome plated brass, hex key fitting as original, c/w fibre...
47 Tooth Gp AF 6 plate road clutch (cassette clutch), comes complete ready to fit with full instructions...
6x14 stainless steel set screw. Used to secure standard type chain adjusters.
Dowel that locates the end plate to engine case and also locates the chain case to the main engine case,...
80 link chain .. Iwis (German) chain .. These are the best chains for Lambretta. Chain Combinations:...
Gear selector fork M6 screw but with a smaller head, so you use a 9mm socket instead of a 10mm that you...
High quality Clutch needle bearing.. Used as standard on Li, SX, TV models.. two needed
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
Internal layshaft shim 0.5 mm,this shim sits between the layshaft and rear hub bearing..
Kickstart stop allen screw cap and spring washer.. fits inside the chaincase on later Indian Gp case...
Magnetic drain, level & breather plug set with fibre washers..
Chain tensioner lazer cut clamp plate & stud set This is used to hold the top chain slipper in place...
Gear selector ball bearings & standard spring that in the layshaft ....
Standard gear selector spring that fits in the layshaft ....
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
Gear selector arm shaft, for Sx,Tv,Li and Lis..to be used with Casa gear arm These can be used for series...
Replacement Gran Turismo chain tensioner adjuster nut.
Uni multiclutch kit, rack and pinion clutch. The multi clutch is intended to work with a modern high...
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
Clutch pressure pad for gp type side/chaincases. This item sits in a GP crankcase side and is pushed...
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
46 Gp AF 6 plate road clutch (cassette clutch), 46 tooth comes complete ready to fit with full instructions...
S3 li, Sx, Gp/Dl Kickstart lever, highly chromed. For extended lever screw use part number TL6189
Top & Bottom Chain Guide Set for standard series 1, 2 & 3 Scooters.
Clutch quadrant that fits inside the side casing and either presses on the clutch nipple (Li, Sx, Tv)...
Chain/Crankcase side case Gasket Bgm silicone type....