\\r\\n
MB Cable adjuster screw complete with nut, in stainless steel. Three needed per scooter....
Gear swivel pivot post shim & circlip set
MB oversize (m8) brake and lever pin, made by MB Scooters.... If your lever holes are oval d and worn...
Rear brake adjuster, for series 1,2 and 3 ...Made in Italy. Casa L110
MB Gear and clutch trunnion, this is a universal long type in st/st it comes with a small disc that goes...
Shorter (340mm) choke cable BLACK for TS1/RB/SS type cylinders but is also long enough to fit the standard...
Rear brake cable ferrule/top hat in stainless steel. mb scooters
6mm Ferrule to fit on outer cable end so you can shorten your cable if necessary...
Clutch trunnion set in brass , 2 short for the outer gear cable and clutch cable and 1 long for the inner...
Cable inner set made by BGM.. contains the following: 2 x 2.1M inner cables with pear shaped end for...
S3 & Gp/Dl cable strap that secures the cables to the frame with holes in for grease nipples to go through,...
Fork cable spring clip in stainless steel for speedo and front brake cables on series 3 & Gp/Dl. MB ...
Front brake adjuster, this is the correct Italian type with the "wheel" adjuster, all as per original......
Clutch arm spring..fits on clutch arm on chain case in stainless steel made by Mb Scooters..
Standard length throttle inner cable with open end on carb for solderless nipple to attach...
Brake lever anti vibration cups & springs that fit inside the brake or clutch levers ....
Front and rear brake adjuster barrel made in Stainless Steel, MB.
Lever pin set : Pins ,stars and nuts remade to exact specification by Casa Lambretta UK (scootopia) other...
Rear brake cable clamp (the one that fits on to the rear brake pedal) nut,washer,bolt and clevis pin...
XL throttle cable inner and outer in GREY ....
Solderless nipple 5.5mm diameter that fits in the throttle wheel in the headset ...
Sip performance cable trunnion set, 2 short for the outer gear cable and clutch cable and 1 long for...
Cable trunnion set, 2 short for the outer gear cable and clutch cable and 1 long for the inner gear cable...
7mm Ferrule to fit on outer cable ends so you can shorten your cable if necessary...
Cable trunnion set in stainless steel trunnion set with nice flats on so that a 10mm open end spanner...
Rear brake cable clamp/guide that sits under the gear and clutch adjuster block zink coated..
Solderless nipple 5.5mm diameter that fits in the throttle wheel in the headset this has an allen type...
5mm Ferrule to fit on outer cable ends so you can shorten your cable if necessary...
Easy fit type rear brake cable.. Stainless steel braided wire..
Headset cable guide set (2)for series 1,2,3 and Gp/Dl, these hold the Front Brake and Clutch Cables toward...
Cable adjuster.. Screws into the cable adjustment block, and adjusts clutch or gear cables....
Lever pivot pin and star washer as original for brake and clutch sides.
New type MB clutch inner cable made slightely thinner for a better clutch feel.
Gear selector arm/tie bar Stainless steel E clip.