\\r\\n
SH 5899-4 Atomiser for Scootopia and Dellorto carbs. Originally fitted to GP125. GP150, 125 Special &...
Choke Lever Assembly for series Gp/Dl and j50 special. Casa B266
MB Fuel tank strap trunnion series 1 & 2 in stainless steel.
48 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
Petrol tank dip stick with ethanol friendly rubber seal for Series 1,2,3 and Gp petrol Tanks. Simply...
25mm PHBL Dellorto and 24mm Mikuni carburetors to 200cc type cast cylinders (200cc Race-Tour, Factory,...
Granturismo reeds and reed block gasket set.
BGM PRO air filter by Marchald- for Polini CP type carburettors Ø17.5-19-21-23-24mm, CS Ø=46mm, L=55mm...
S3 & Gp Mesh fast flow Air Filter from MB. This filter allows the engine to breathe more freely than...
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
SH 5899-1 Atomiser for Scootopia and Dellorto carbs. Originally fitted to LI125 & 150 S3 models... Scootopia...
25 phbl to 26-30 phbh.. Stepped carb rubber so you can change carbs not manifolds..
Choke lever metal cap in stainless steel that sits at the rear of the choke unit..for all series 3, Gp/Dl...
Version 2 fast flow..This is a fast flow rear exit fuel tap which means it is suitable for all standard...
Ethanol resistant petrol/ Fuel Hose cut in 2 foot lengths. Best fuel hose we have used here, nice tight...
Small Block 22mm inlet manifold. Fits Dell'orto SH22 and Jetex carburettors. These manifolds can be used...
45 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
20mm carburettor, This is a remade version of the now discontinued Dellorto SH20 that was originally...
NEW DESIGN! Casa Performance 'PowerFlow' internally-reinforced blue foam type airfilter for large carbs...
22mm (gp200/gp150) air intake hose for models with the SH22 carb. Also fits Jetex 22/26 . Casa B39
Bgm Long range Fuel Tank which is unique in design, as they are manufactured from polyethylene (HDPE)....
Flange type carb rubber to suit 28-35 Mikuni made by Mb Scooters Fits 40mm (38 - 42mm) spigot outside...
7895-2 Slide for 150 models Dellorto & Scootopia carbs made by Scootopia
Ethanol resistant float for Dellorto and Scootopia made SH carbs that originally fitted series 3 and...
MB Fuel tank strap trunnion (TWO) set in stainless steel for series 1,2,3 and Gp.
Fuel tank strap set including trunnions in WHITE
Triple layered micro air filter for PHBH 26, 28, or 30mm carbs. cleanable, washable and re-usable. Also...
Air Hose Clip in stainless steel , for the top and bottom on 22mm air hoses and all hose sides that fix...
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
BGM Flange type Inlet manifold Kit for RT 195 & 225 cylinder kits. For 26mm, 28mm and 30mm Dellorto PHBH...
32 - 34 - 36mm Rubber inlet manifold for Casa Performance SS kits SS200 + SS225 + SSR250
SH1/18 & 20 slide 5914-1 for models LI125, 150 Special, TV175, TV200 SX200 & Vega 75 will fit both Dellorto...
Inlet manifold for 18-20mm size carbs These manifolds can be used on just about any cylinder, from Mugello...
MB flange type TS1 inlet manifold and fixings. New style inlet manifold from MB. Uses a flange type rubber...
MB Reed Packing Plate. TS1 reed packing plate 3mm thick, designed to be used to space out a BGM Yamaha...
Air filter to fit all Serveta models that have the air intake system through the tool box.. made in Italy,...