SIP DSRC 28mm PHBH RUBBER MOUNTED CARB..
pre jetted the with the following.
Main jet 120
Pilot jet 55
Slides 40 Spare 50
Needle X13 Spare X2
Atomiser AV264
Needle Valve 350
Choke Jet 70
Cable Choke
These black DSRC carburettors have a cable choke. They have a 350 float needle valve fitted and come with two slides, 40 & 50. and two needles X13 & X2
Conclusion: An inexpensive, high-performance carburettor that is perfect for mid-range tuning
Black 28mm DSRC (Dellorto PHBH version) carburettor that comes with a cable choke, 350 float needle valve, and two throttle slides a 40 and a 50. The intake funnel with a 62mm connection width is perfect for large air filters as well as the connection of the original intake hose. The DSRC carburettors from SIP Performance come with a basic jetting that provides a good starting point for finding your right setup. However, the fine-tuning to match the corresponding engine setup must be carried out in each case by yourself and in each case is engine-specific!

Exceptional - David Chester - 14 October 2023
Very well made and at a reasonable price. Very pleased with this purchase
PHBH Carb mounting rubber for 26-30mm Dellorto PHBH, VHSH carbs.. made by Mb.
PHBH 26, 28, 30 Flange type carb rubber to suit all Dellorto PHBH carbs 26, 28, 30mm, Mikuni 30mm and...
MB Needle and Atomiser set for Dellorto PHBH. X7, X7/13, X13, X13/X2, X2, 2 clips, AV264, AV266. Comes...
26 - 30 mm PHBH Rubber inlet manifold Casa Performance. for inlet manifolds x12, x12a and various othe...
PHBH One piece carb rubber to suit the MB shorty reed manifolds made by Malossi. This comes with the...
Mb TS1 inlet manifold, comes with flange rubber for Dellorto phbh.... Kit comprises:- Inlet manifold,...
Casa flange type large block inlet manifold with phbh flange rubber. Perfect for Race-Tour 195/200 -...
BGM Flange type Inlet manifold Kit for RT 195 & 225 cylinder kits. For 26mm, 28mm and 30mm Dellorto PHBH...
Black 28mm DSRC (PHBH) carburettor that comes with a cable choke, 350 float needle valve, and two throttle...
200cc Gasket set for non Autolube P 200 E 1978 to 1981 - NON OIL INJECTION. PX 200 E 1981 to 1984 - NON...
Replacement exhaust down pipe, for Avanti clubmans
Plastic gear wheel & pin for Gp/Dl using Italian control rods (4mm roll pin hole)