Stator Pick Up Shim Set

Electronic ignition pickup shim set of 3,

A good functioning electronic ignition is strongly dependent on whether the trigger surfaces of the pole wheel are exactly aligned with the induction vanes of the pickup on the ignition base plate.
Due to an addition of manufacturer tolerances (e.g. different cone angle, different heights etc) the alignment can be out.

 With these shims the pickup can be lifted up in 0,5mm steps by a total of 1,5mm, so that the ignition pulse is transmitted cleanly to the CDI again.

If your engine does not start, e.g. after a conversion to an electronic ignition, this could be the problem solution