\\r\\n
Engine side case fixing kit stainless steel.. contains: m6 Nyloc Nut x 14 m8 Nyloc Nut x 2 m6 Flat Washer...
Engine side case allen screw & wavy washer fixing kit stainless steel..
Gear selector arm bush in brass that fits in the the engine case....
High performance AF race crank, Gp 58mm with a 107 conrod. this made by AF Rayspeed and this is their...
Mag housing sealing plate Stud kit. The kit includes: 2 stainless steel studs. 2 nyloc nuts. 2 wavy ...
M6 grease nipple ..correct shape, 8 needed for series 1 & 2 models, 6 needed for series 3 models....
Scootopia 3 Hole engine mounts (silent blocks) very high quality made by Scootopia ..sold in pairs.....
Rear hub bearing retaining plates....inner & outer ....
Woodruff Key....Good quality Italian made crank shaft key, fits in the slot to locate flywheel to the...
Cylinder stud & extended nut set the stards are made in high tensile steel Longer than standard M8 x...
160mm Cylinder stud set, made in high tensile steel Longer than standard M8 25 - 110 - 25
L shaped washer sits inside your magneto housing and holds one of the oil seals in place....
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
Engine bump stop rubber & washer for series 2,3 &Gp/Dl....
1mm piston shim used on gudgeon pins to take up end float on standard pistons. 2 needed per piston.
Flywheel cover in steel,black in colour . thinner type for standard length flywheel fins.
Chain tensioner lazer cut clamp plate & stud set This is used to hold the top chain slipper in place...
Magnetic drain, level & breather plug set with fibre washers..
Gp 58mm stroke 107mm conrod Road/Race crankshaft, with shimmed conrod made in Italy, teflon coated, high...
4 slot head screws (standard Innocenti) that hold the drive side oil seal plate in place. These are the...
Xtra long (45mm) M6 crank case stud, Ideal for hanging exhausts to.
TS1 225cc cylinder kit with Asso Piston including 70mm AF skimmed head (9.5:1 compression)....
Dowel that locates the end plate to engine case and also locates the chain case to the main engine case,...
M6, Rear hub bearing stud for series 1,2,3 & Gp/Dl .. 4 required ....
Engine side case fixing kit stainless steel.. contains: m6 Nut x 14 m8 Nut x 2 m6 Wavy Washer x 14 m8...
Engine Bar Nuts & Wavy Washer Set in stainless steal..
Gp/Dl Cylinder head cowling in WHITE ... With fixed internal plate (can be fitted at all lambretta models...
Cylinder head cowling in WHITE ... Original style LI/SX & TV cylinder cowl (also fitted to early DL/GP...
Side case oil level plug for series 1,2,3 and Gp/Dl as original.. Scootopia....
200cc Gp/Dl engine case Uni Bare case includes matched end plate and side studs
ST ST Magnetic drain, level & breather plug set with fibre washers. made by Gran Turismo
70mm (225) Cylinder Head 9.5:1 Compression....
TS1 cylinder kit with Asso piston 70mm BGM billet cylinder head....
66mm (200cc)Cylinder Head 9.5:1 Compression.