\\r\\n
Fast flow fuel tap for series 1,2,3 & GP .. OMG made in Italy
22mm (gp200/gp150) air intake hose for models with the SH22 carb. Also fits Jetex 22/26 . Casa B39
This is a fast flow fuel tap which means it is suitable for all standard and tuned engines.The tap has...
Air hose clip that fits the bottom of the air hose bellows rubber when using a standard 18/20mm carb...
Carburettor Sleeve Plastic Insert for Dellorto and Scootopia SH2/22 type carbs.
Choke lever metal cap that sits at the rear of the choke unit..for all series 3, Gp/Dl and series 2,...
MB S3 8 piece tank rubber set, for series 3 Li, Tv, Lis & Sx but will fit gp/Dl as well (later Gp/Dl...
S1 & 2 8 piece petrol tank rubber buffer set. Scootopia
Air filter elbow spring clip for series 2,3 & Gp/Dl scooters....
Fuel tank strap trunnions set in zink for series 1,2,3 and Gp.....
Petrol tank cap rubber seal for all standard Lambretta fuel tank caps....
BGM fuel hose. Clear anti kink hose.... Sold by the foot or multiples of 1 foot lengths....
Fuel tank felt/gasket set for series 1 & 2. From factory, these were originally fit to models - Series...
Free fast flow air filter for all series 1 and 2.
Scootopia super fast flow petrol tap version 2. Designed with the internals of the tap to be much larger...
MB Petrol tank cap rubber seal for all standard Lambretta fuel tank caps in viton....
Petrol tank cap with ethanol friendly rubber seal for Series 1,2,3 and Gp petrol Tanks including Oiltek...
Long range(mid) petrol tank for S3 & Gp, comes with tank straps.. Cut outs both sides for carb fitment...
Air hose bottom spring clip that holds the cup at the bottom of the air hose in place for series 1,2...
Air Filter from BGM for Series 1 & 2 Lambrettas, it has a fine wire mesh to filter the air. It allows...
Throttle cable adjuster rubber, this is for standard dellorto SH and Jetex carbs....
22mm carburettor, This is a remade version of the now discontinued Dellorto SH22 that was originally...
Ethanol resistant SH float needle replacement valve for Dellorto SH18/20/22 carbs.. Scootopia Produc...
Petrol tank . designed to original drawings and powder coated in white. made by Scootopia
TS1 reed block gaskets..There are two different size original TS1 inlet gaskets one small and one large,...
Choke lever metal cap in stainless steel that sits at the rear of the choke unit..for all series 3, Gp/Dl...
Short inlet stud for RT cylinders in stainless steel. 7x34mm - 17x7x10mm, exhaust port, oval, RT inlet...
Split pin for connecting petrol tap lever to the petrol tap and the rear brake pedal clevis pin.... Two...
Air hose valve that fits Series 1,2 and 3 scooters in stainless steel..
Gp Fuel tank strap set including stainless steel trunnions. for standard size fuel tanks. made by MB...
Fuel tank strap set including trunnions in BLACK.
Choke Lever Assembly for series 1 & 2 as per original....
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
SH1/18 & 20 slide 5914-1 for models LI125, 150 Special, TV175, TV200 SX200 & Vega 75 will fit both Dellorto...
NEW DESIGN! Casa Performance 'PowerFlow' internally-reinforced blue foam type airfilter for large carbs...
Triple layered micro air filter for PHBH 26, 28, or 30mm carbs. cleanable, washable and re-usable. Also...
22mm air hose with Ram filter & clips Will fit - Dellorto SH22, Mikuni 24/25 cARBS
20mm air hose with Ram filter & clips Will fit - Dellorto SH18/20, Dellorto PHBL 25mm CARBS
Complete Series 1 & 2 air hose with clips, cup, pipe & valve.
Petrol tank strap kit to suit Series 1 Comes with; 2 tank straps, 637mm long, stainless steel,...