\\r\\n
Retard (Josef) electronic ignition plug in. Plug & Play 5 degree ignition retard unit.
Set of 3 shims that take up play when fitting different type ignition switches in headsets. made by ...
HT grommet that fits on the frame leg that the HT lead passes through....
Triangular HT Lead/cable rubber grommet....This rubber fits on your frame and secures the standard throttle...
Triangular HT Lead/cable rubber grommet....
Flywheel wavy washer that fits behind the flywheel nut securing the flywheel to the crank for li/sx/tv...
Flywheel wavy washer that fits behind the flywheel nut securing the flywheel to the crank for gp fly...
BGM li/sx/ flywheel nut. ONLY SUITABLE FOR LI/SX TYPE FLYWHEELS
BGM li/sx/ flywheel nut and correct size li/sx/tv flywheel washer. ONLY SUITABLE FOR LI/SX TYPE FLYW...
Flywheel nut & washer (Gp/Dl), only for Gp type crankshaft .. made by Scootopia
Sx/Li/Tv Lightened Mid weight Electronic Flywheel to fit Li/Tv/SX Type Crank shaft, This is manufactured...
Flywheel anti vibration grommets made to original specifications by Scootopia ..these have a very nice...
GP 12v Electronic Flywheel to fit Gp Type Crank shaft, short fin type. weighing approx 2600g
Flywheel dust cover early type as original..Ducati marked .. This will fit most 4 and six pole flywheels,...
Ducati Flywheel dust cover marked as original, Later type..This will fit most 4 and six pole flywheels,...
Earth tab that fits under one of the maghousing sealing plate screws for an extra earth point.
Earth wire, short copper earth strap for series 1 & 2 rear lights...
Digital multimeter -CTM-REV "Check-202" 2V - 250V- with rubber holster, and sound buzzer when testing...
FILSO ignition Italian EFFE 00811356 (INNOCENTI) part number fits: Lambretta 125 LI 1 -2 / 150 LI 1 -2...
Condenser 6 Pole for Lambretta 125 LI 3 / Special/ GP/ DL/ 150 LI 3 / Special/ SX/ GP/ DL/ 175 TV 3 /...
Varitronic Cdi for 12v Scootopia varitronic electronic ignitions.
MB CDi Rubber Cover. Fits electronic cdi coils from BGM, Af, Piaggio, Ducati and all Pattern versions....
Cdi Rubber protection cover (small type) for Ducati, BGM, SIL type CDI units. Suitable for Vespa or Lambretta....
CDi Rubber Cover. Fits electronic cdi coils from BGM, Af, Piaggio, Ducati and all Pattern versions.
Cdi for 12v electronic ignition with red casing Also fits Vespa..
Electronic ignition Cdi mounting bracket for series 1 & 2, to fit standard type cdi s
S1 & 2 Electronic ignition (cdi and regulator) mounting bracket to fit standard type cdi s and BGM type...
BGM Vintage Electronic cdi/coil for lambretta 12v electronic ignitions. BRACKET FOR COIL TL5147
12v AC/DC V4.5 stator plate. This is stator will run both DC & AC ignition systems Works with BGM Rectifiers...
MB rubber cover for BGM Regulator/Rectifiers, purpose made rubber cover made by MB scooters.... price...
Voltage regulator Multi plug adaptor for bgm style regulators.
6V regulator, for standard 6v systems with no regulator, to give steady 6v lighting....
12v AC/DC Voltage regulator 12V AC/DC universal regulator for all electronic 12v ignitions. The regulator...
BGM low tension coil, this is a direct replacement coil for all Electronic stators.. Some small mods...
Bgm GP/dl Electronic Flywheel, weight (2000g) flywheel..
Electronic ignition system (AC) ready to fit with all BGM parts for a GP crank taper BGM GP Electronic...
12v electronic cdi in RED comes with ht cap and ht lead ....
BGM electronic cdi in BLUE comes with ht cap and ht lead ....
BGM Electronic cdi for lambretta and Vespa 12v electronic ignitions....
BGM 12v DC Regulator/Rectifier, DC TYPE (WASSELL/PODTRONICS)
Battery tray and straps to fit series 1,2 & Tv series 2, very good quality made in Italy by Casa Lam...
AC Variable Ignition Kit DL/GP type crank fitment Flywheel 2200g, 12V, AC with optional 12v DC Variable...