\\r\\n
Gear selector arm with the shaft and lever all in one. These can be used for series 2,3 and Gp engin...
Gear selector arm shaft, for Sx,Tv,Li and Lis..to be used with Casa gear arm These can be used for series...
End Plate fixing kit. 6 x High tensile screws 6 x Flat washers 6 x Spring washers
16 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
17 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
18 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
BGM 19 T front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link Chain...
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
BGM Gear selector pawl set including circlips. made in Germany
Crankcase Breather/filler plug and fibre washer Casa B104
Clutch arm rod/shaft that fits inside the chain casing and the operating lever fixes to, for li,Tv,Sx...
3 Piece gear cluster bearing and bush set, comprising of: Gear cluster bearing. Bush. Shim (fits under...
Gear selector arm/tie bar Stainless steel E clip.
High quality Clutch needle bearing.. Used as standard on Li, SX, TV models.. two needed
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
Kickstart piston disc, this sits in the kickstart shaft where the kickstart piston goes behind the s...
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
Gear selector fork M6 screw but with a smaller head, so you use a 9mm socket instead of a 10mm that you...
Magnetic drain, level & breather plug set with fibre washers..
Sx,Tv and Li series 1,2 & 3 clutch pressure/bell Thimble...
MB Large clutch retaining circlip, designed by mb scooters to be a better fit.... may need slightly grinding...
MB Front drive sprocket spring for series 1,2 & 3.... made by mb scooters..
Chain tensioner lazer cut clamp plate & stud set This is used to hold the top chain slipper in place...
GP Top bearing pressure plate insert for AF cassette 6 plate clutch.
Clutch quadrant that fits inside the side casing and either presses on the clutch nipple (Li, Sx, Tv)...
Clutch arm spring..fits on clutch arm on chain case in stainless steel made by Mb Scooters..
kickstart rubber in Blue for series 1,2,3 & Gp/Dl.. Casa C86b
kickstart rubber in Red for series 1,2,3 & Gp/Dl CASA C86r
Gear change arm & screw for li/Sx/Lis and Tv type gear shafts..
Clutch Operating Arm that fits on chain case, made by MB.... remade in a hardened steel then zinc co...
2.3 mm thick gearbox shim..this shim fits on top of the first gear....
2.5 mm thick gearbox shim..this shim fits on top of the first gear....
2.7 mm thick gearbox shim..this shim fits on top of the first gear....
Clutch Operating Arm that fits on chain case, made by MB.... remade in a hardened steel and hard chrome...
1.75 mm MB kickstart shim in Zink.. fits on kickstart shaft before the outer circlip....
MB kickstart 4 piece shim set in zink.. comprising of. 1.0 mm 1.5 mm 1.75 mm 3.00 mm
Kickstart lever screw (Longer) & washer for non original kickstart levers.
End Plate fixing kit. 6 x High tensile Studs 6 x Nuts 6 x Spring washers
1.6 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....