\\r\\n
1mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
Gear selector fork M6 screw but with a smaller head, so you use a 9mm socket instead of a 10mm that you...
0.5 mm stainless steel Kickstart shim .. fits on kickstart shaft after oil seal and before the outer...
1 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.5 mm stainless steel Kickstart shim .. fits on kickstart shaft after oil seal and before the outer...
2.0 mm stainless steel Kickstart shim .. fits on kickstart shaft after oil seal and before the outer...
MB lazer cut kickstart shim 1.5mm thick. fits on kickstart shaft before the outer circlip.
1.75 mm MB kickstart shim in Zink.. fits on kickstart shaft before the outer circlip....
Clutch arm spring..fits on clutch arm on chain case in stainless steel made by Mb Scooters..
0.8 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.0 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.3 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.5 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.6 mm Clutch shim. MB precision clutch shim remade in hardened shim steel.
1.9 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
Clutch plates 1.2mm thick .. Sold individually. 3 needed for standard set ups. 4 needed for 5 plate set...
Gear selector ball bearings & standard spring that in the layshaft ....
Casa performance uprated gear selector spring that fits in the layshaft .... Casa X249a
Internal layshaft shim 0.5 mm,this shim sits between the layshaft and rear hub bearing..
1.8 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
0.9 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.1 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.4 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.7 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.2 Clutch shim..MB precision clutch shim remade in hardened shim steel....
2.0 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
Sx,Tv and Li series 1,2 & 3 clutch pressure/bell Thimble...
Kickstart oil seal.. Fits all Series 1, 2 & 3 engines. Mb RaceTour brand..
BGM Superstrong clutch compressing tool to be used with part number TLM8011TL2
Oil seal and circlip set for the chain/kickstart case series 1,2,3 and Gp.
kickstart rubber in GREY for series 1,2,3 & Gp/Dl.. made by Scootopia....
MB Clutch plates 1.0mm thick .. Sold individually. 3 needed for standard set ups. 4 needed for 5 plate...
Chain tensioner/slipper locking plate. This is used to spread the load from the two studs that hold the...
Clutch springs for series 1,2,3 and Gp/Dl.. Standard type Springs .... Comes in sets of 5.
End Plate fixing kit. 6 x High tensile screws 6 x Flat washers 6 x Spring washers
Gear selector arm bush in brass that fits in the the engine case....
Oversize kickstart index pin. with allen key fitment Casa performance X249cxl
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
2.6 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
Chain tensioner lazer cut clamp plate & stud set This is used to hold the top chain slipper in place...
Clutch quadrant that fits inside the side casing and either presses on the clutch nipple (Li, Sx, Tv)...
MB Large clutch retaining circlip, designed by mb scooters to be a better fit.... may need slightly grinding...
2.4 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
2.9 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....