\\r\\n
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
BGM 19 T front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link Chain...
18 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
17 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
16 tooth BGM front sprocket. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46 81 Link...
End Plate fixing kit. 6 x High tensile screws 6 x Flat washers 6 x Spring washers
Gear selector arm shaft, for Sx,Tv,Li and Lis..to be used with Casa gear arm These can be used for series...
Gear selector arm with the shaft and lever all in one. These can be used for series 2,3 and Gp engin...
Clutch plates 1.2mm thick .. Sold individually. 3 needed for standard set ups. 4 needed for 5 plate set...
Magnetic Drain Plug for series 1,2,3 and Gp, Chrome plated brass, hex key fitting as original, c/w fibre...
7mm spring washer in zink various uses, end plate, exhaust and inlet studs. 6 are required for the end...
Clutch pressure/bell Gp/Dl type..excellent quality and very well made.
Clutch spider, one piece. For Series 1, 2, 3, Gp/Dl & Serveta. Casa M283
kickstart rubber in GREY for series 1,2,3 & Gp/Dl.. made by Scootopia....
Bronze clutch bush with an oil groove machined in it...
Gear selector arm circlip,, the one that holds the tie bar on .
Gear change arm for li/Sx/Lis and Tv.. zinc plated and comes with stainless steel screw and wavy washer....
1mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
Gear selector ball bearings that fit either side of the gear selector spring in the layshaft .... SOLD...
MB Gear Selector Spring. uprated gear selector spring ..gives a slightly more stiffer feel when changing...
Kickstart piston (these are the best you can get for Lambretta) remade by MB Scooters.
MB lazer cut kickstart shim 1.5mm thick. fits on kickstart shaft before the outer circlip.
Engine circlip kit contains the correct circlips to overhaul an engine including stainless steel one...
Dowel that locates the end plate to engine case and also locates the chain case to the main engine case,...
Oil level plug hex key fitting type for series 2,3 & Gp/Dl.. Casa B102
2.8mm thick gearbox shim..this shim fits on top of the first gear....
Clutch Sprocket / Crown Wheel 47 Tooth for m4 or 5 Plate Clutch set ups, Machine cut deeper so that the...
Mid Uprated clutch springs we call these TL springs a mid rated clutch spring which is inbetween standard...
3mm thick clutch steel top plate for series 1,2 & 3....
2.5mm top Clutch steel top plate for series 1,2 & 3....
Kickstart outer circlip in... This circlip uses extra tags which spread the load around the outer wa...
Chain tensioner/slipper locking plate. This is used to spread the load from the two studs that hold the...
Clutch Sprocket / Crown Wheel 46 Tooth for 4 or 5 Plate Clutch set ups, Machine cut deeper so that the...
MB Layshaft with matching MB rear hub bearing & Seals complete overhaul set. Includes: Layshaft Rear...
Clutch steel top plate 2.0 mm thick for series 1,2 & 3....
Series 1 & 2 kickstart lever, high quality chrome. For extended lever screw use part number TL6189