\\r\\n
Magnetic Drain Plug for series 1,2,3 and Gp, Chrome plated brass, hex key fitting as original, c/w fibre...
Bronze clutch bush with an oil groove machined in it...
3mm thick clutch steel top plate for series 1,2 & 3....
0.5mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
Clutch arm spring..fits on clutch arm on chain case in stainless steel made by Mb Scooters..
Surflex 4 Plate Clutch corks for series 1,2 & 3,made in Italy best quality.
0.2mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
MB stainless steel shim that can be used on the gear arm, clutch arm, brake cam and the rear brake p...
Kickstart oil seal.. Fits all Series 1, 2 & 3 engines. Mb RaceTour brand..
Clutch arm shaft that fits inside the chain casing and the operating lever fixes to, for Gp/Dl type side...
Gear Selector "sliding dog" made by Casa Lambretta in Italy .. for series 2, 3 & Gp/Dl engines.... excellent...
Kickstart lever screw (Longer) & washer for non original kickstart levers.
Kickstart piston & index pin for series 1 Li, 2, 3 and Gp/Dl..
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
IVS marked Kickstart lever screw nut & washer for li/tv & Sx for original type levers. For non original...
Kickstart Bushes, Chaincase/side case inner & outer bush set(fits where kickstart shaft goes) in bra...
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
1.75 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Kickstart shaft outer circlip in stainless steel
Sx,Tv and Li series 1,2 & 3 clutch pressure/bell Thimble...
kickstart rubber in Blue for series 1,2,3 & Gp/Dl.. Casa C86b
1.25 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.5 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Chain/Crankcase side case Gasket Bgm silicone type....
1.2mm Clutch plate steel. for series 1, 2, 3 & Gp. made by BGM.
Gear selector ball bearings that fit either side of the gear selector spring in the layshaft .... SOLD...
Clutch quadrant that fits inside the side casing and either presses on the clutch nipple (Li, Sx, Tv)...
Gear selector fork M6 screw but with a smaller head, so you use a 9mm socket instead of a 10mm that you...
Clutch plates 1.2mm thick .. Sold individually. 3 needed for standard set ups. 4 needed for 5 plate set...
Dowel that locates the end plate to engine case and also locates the chain case to the main engine case,...
Casa performance uprated gear selector spring that fits in the layshaft .... Casa X249a
Gear selector ball bearings & standard spring that in the layshaft ....
Kickstart lever screw nut & washer for li/tv & Sx for original type levers. For non original lever use...