\\r\\n
Gear selector ball bearings & standard spring that in the layshaft ....
Standard gear selector spring that fits in the layshaft ....
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
Gear selector arm shaft, for Sx,Tv,Li and Lis..to be used with Casa gear arm These can be used for series...
Replacement Gran Turismo chain tensioner adjuster nut.
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
Top & Bottom Chain Guide Set for standard series 1, 2 & 3 Scooters.
Clutch quadrant that fits inside the side casing and either presses on the clutch nipple (Li, Sx, Tv)...
Chain/Crankcase side case Gasket Bgm silicone type....
Clutch plates 1.2mm thick .. Sold individually. 3 needed for standard set ups. 4 needed for 5 plate set...
Clutch pressure/bell Gp/Dl type..excellent quality and very well made.
3mm thick clutch steel top plate for series 1,2 & 3....
2.5mm top Clutch steel top plate for series 1,2 & 3....
Clutch steel top plate 2.0 mm thick for series 1,2 & 3....
3 Piece gear cluster bearing and bush set, comprising of: Gear cluster bearing. Bush. Shim (fits under...
Kickstart Bushes, Chaincase/side case inner & outer bush set(fits where kickstart shaft goes) in bra...
2.7 mm thick gearbox shim..this shim fits on top of the first gear....
Gear selector ball bearings that fit either side of the gear selector spring in the layshaft .... SOLD...
Gear selector arm circlip,, the one that holds the tie bar on .
7mm spring washer in zink various uses, end plate, exhaust and inlet studs. 6 are required for the end...
Kickstart piston disc, this sits in the kickstart shaft where the kickstart piston goes behind the s...
2.5 mm thick gearbox shim..this shim fits on top of the first gear....
2.3 mm thick gearbox shim..this shim fits on top of the first gear....
kickstart rubber in GREY for series 1,2,3 & Gp/Dl.. made by Scootopia....
Mid Uprated clutch springs we call these TL springs a mid rated clutch spring which is inbetween standard...
Gear selector arm with the shaft and lever all in one. These can be used for series 2,3 and Gp engin...
GP Top bearing pressure plate insert for AF cassette 6 plate clutch.
Gear change arm & screw for li/Sx/Lis and Tv type gear shafts..
Surflex 4 Plate Clutch corks for series 1,2 & 3,made in Italy best quality.
1.5 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.25 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.75 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Gear selector arm bush in brass that fits in the the engine case....
Brass bush/bearing with oil grooves for the crown wheel,normally fitted to gp s but they can be fitted...
1.4 mm thick gear shim..this shim fits on top of the first gear....
Clutch arm shaft that fits inside the chain casing and the operating lever fixes to, for Gp/Dl type side...