\\r\\n
2.4 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
2.8 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
Gear selector arm & shaft, for Sx,Tv,Li and Lis..
IVS marked Kickstart lever screw nut & washer for Lis Sx Gp for original type levers. For non original...
Kickstart piston disc, this sits in the kickstart shaft where the kickstart piston goes behind the s...
kickstart rubber in GREY for series 1,2,3 & Gp/Dl.. made by Scootopia....
Internal layshaft shim 0.5 mm,this shim sits between the layshaft and rear hub bearing..
BGM racing red clutch set of 6 for the BGM PRO Superstrong clutch. BGM8006
High quality Clutch needle bearing.. Used as standard on Li, SX, TV models.. two needed
1.8 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
0.5 mm stainless steel Kickstart shim .. fits on kickstart shaft after oil seal and before the outer...
Push Up Pull Down chain tensioner. Jockey s Boxenstop
1.3 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.9 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
End plate X159...Casa Performance Casa Performance Reinforced steel gearbox endplates for all Lambretta...
1.8 mm Gear Box Shim ..MB precision gearbox shim remade in hardened shim steel....
2.0 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
MB Clutch arm shaft kit that fits both Li & Gp chain cases. MB Product
1.2 Clutch shim..MB precision clutch shim remade in hardened shim steel....
MB Front drive sprocket spring for series 1,2 & 3.... made by mb scooters..
1.9 mm Gear Box Shim ..MB precision gearbox shim remade in hardened shim steel....
2.3 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
2.9 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
0.9 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
1.6 mm Clutch shim. MB precision clutch shim remade in hardened shim steel.
0.3mm Clutch spider shim, for when using standard clutch spiders and crown wheels there is always a lot...
MB made set of one of each 7.5mm first oversized, 8mm second oversized and a stepped 8/7mm oversized...
2.1 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
2.2 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
2.5 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
2.7 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
Gear change arm & screw for li/Sx/Lis and Tv type gear shafts..
Kickstart outer circlip in... This circlip uses extra tags which spread the load around the outer wa...
1mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
MB kickstart 4 piece shim set in zink including oil seal and lugged type circlip. comprising of: 1.0...
16 tooth front sprocket. made by Mb. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46...
MB Clutch quadrant that fits inside the side casing and either presses on the clutch nipple (Li, Sx,...
MB Gear Selector Spring. uprated gear selector spring ..gives a slightly more stiffer feel when changing...
Oversize kickstart index pin. with allen key fitment Casa performance X249cxl
Kickstart stop allen screw This allen screw fits into the crankcase side and stops the kick-start shaft...
Racing red superstrong clutch cork set of 5 each cork is 2.5mm thick. BGM8005R
Powermaster clutch friction plate 2.35 thick. made in Italy by Surflex
Clutch Operating Arm that fits on chain case, made by MB.... remade in a hardened steel and hard chrome...
MB Clutch arm shaft that fits both Li & Gp chain cases. MB Product
Clutch pressure/bell Gp/Dl type..excellent quality and very well made.