\\r\\n
Legshield end cap T nut in stainless steel. sits on the front of the legshields .. 2 needed for series...
Rear brake cable ferrule/top hat in stainless steel. mb scooters
Choke lever metal cap in stainless steel that sits at the rear of the choke unit..for all series 3, Gp/Dl...
Headset (handlebar) Fixing kit for series 2 in stainless steel.. MB Product
Rear number plate fixing kit for series 1 & 2 with stainless steel fixings..
S 2 horncasting fixing kit in stainless steel. MB Product
Series 3 Li/Sx/Tv and Gp horncasting fixing kit in stainless steel.. MB Product
Extra long screw in stainless steel for fixing the inner front mudguard on series 1 & 2 Lambretta s.....
Floor fixing kit for series 1 & 2 in stainless steel, this floor fixing kit is for series 1&2 125cc type...
Floor fixing kit for series 2in stainless steel, this floor fixing kit is for series 1&2 150cc type floor...
Dial Gauge bracket, this bracket sits on top of the cylinder to hold a DTI gauge to set TDC... made by...
Fork link 12mm half nut for fork link bolts, these are a finer pitch than the front wheel spindles and...
Gp & late SX Fork Pistons/rods in stainless steel made by Mb scooter.. sold in pairs
MB rear adjuster assembly, completely made in stainless steel....
MB front brake adjusters remade in stainless steel, this version comes with a Brass knurled nut....
MB Front drive sprocket spring for series 1,2 & 3.... made by mb scooters..
MB Large clutch retaining circlip, designed by mb scooters to be a better fit.... may need slightly grinding...
70mm x 1mm piston rings for MBGM Race-Tour 225 cylinder kits, Ts1, RB etc Also fits other pistons like...
Headset wiring clip/clamp that holds the cables inside the headset in stainless steel.. made by MB..
End plate stud that is made longer one end (the end that locates in the engine casing) to give better...
Rear hub plate stud, this stud tholds the rear hub bearing plate. can also be used to convert a gp gear...
MB mag housing stud, this stud fits in the engine case to secure the mag housing. can also be used for...
MB Headset cable guide in stainless steel for series 1,2,3 and Gp/Dl, these hold the Front Brake and...
TS1 reed block gaskets..There are two different size original TS1 inlet gaskets one small and one large,...
Snake head carburettor top for Mikun TMX35, allows more easy cable routing as the cable enters from the...
MB rubber cover for BGM Regulator/Rectifiers, purpose made rubber cover made by MB scooters.... price...
Gear selector arm/tie bar Stainless steel E clip.
Fork spring stops, remade in nylon, which go up inside the forks. These stops are double the normal thickness...
Fork spring stops, remade in nylon, which go up inside the forks..
0.5mm Handle bar rod shim that fits on the handle bar rod to take out any play....
1mm Shim that fits on the handle bar rod to take out any play....
MB rear brake adjusters remade in stainless steel, this version comes with a Brass knurled nut....
MB front adjuster assembly Li/Lis/Tv/Sx, completely made in stainless steel....
Drive Sprocket Sleeve removing pulling tool. re-made by MB Scooters. Works on Series 1, 2 and 3 moto...
Gp, Sx, Special late type Series 3 headset upgrade kit 2 x Headset rods, Gp, Sx, Tv, Special 125 late...
Headset bolt, MB dual purpose headset bolt which fits both Series 1 and Series 2 headsets. Series 1 uses...
MB crankcase magnetic drain plug made in stainless steel c/w fibre washer.... for series 1,2,3 Gp/Dl...
MB crankcase side level plug made in stainless steel c/w fibre washer.... fits: Series 1 Series 2 Series...
Filler breather cap. Made from stainless steel, designed by MB. Comes with a fibre washer and a length...
Inlet manifold screw in stainless steel bolt inlet manifolds with larger carbs. This bolt is designed...
MB Bar Ends Alloy bar end weights, these are alloy silver type. Used in conjunction with TZR type race...
MB Bar Ends Alloy bar end weights, these are a BLACK painted pair, the bar ends are lightly bead blasted...
Mb Simple wiring loom to suit most models in Black. Simply plugs into each electrical component and cuts...
Rear shock spacer shim. these shims just offset the shock to give it a bit more clearance from the rear...
This rubber fits between the mounting point and coil, use studs, nyloc nuts and washers if you can (or...
0.5mm Magneto house gasket for series 1, 2, 3 & Gp/Dl. made by Mb
These rubbers fit between the mount bracket and Regulators, Rectifiers or Regulator/Rectifier.. made...
MB stainless steel 8mm grease nipple used on some Lambrettas on the front hub (the turning part)....
6mm MB Stainless steel grease nipple, used on some Lambrettas on the front hub backplate, the fork links...
0.3mm thick head gasket for Race Tour 225 (70mm bore) cylinders with extra bolt holes.