\\r\\n
Seat spring Upright type for Giuliari & Noemi Rosa seat frames (4 needed per scooter)
Legshields to mudguard fixing kit in zink for series 3 and Gp/Dl.
Series 3 Li/Sx/Tv and Gp horncasting fixing kit in stainless steel.. MB Product
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
Long air filter bolt for securing air filter for Li3, Lis, SX, TV & Gp/Dl.
Engine side case fixing kit stainless steel.. contains: m6 Nyloc Nut x 14 m8 Nyloc Nut x 2 m6 Flat Washer...
End Plate fixing kit. 6 x High tensile screws 6 x Flat washers 6 x Spring washers
Rear shock half nut and wavy washer kit in stainless steel from MB....
Front spindle nut as original in Zink that are made to exact Innocenti drawings, two required for drum...
Headset (handlebar) Fixing kit for series 3 li,sx,tv & Gp in stainless steel..
Series 2 horncasting fixing kit in stainless steel. MB Product
Stainless steel rear nyloc nut to suit BGM rear shockers but good for all other makes too.. made by MB...
Engine side case fixing kit Zink.. contains: m6 Nyloc Nut x 14 m8 Nyloc Nut x 2 m6 Flat Washer x 14 m8...
Engine side case fixing kit stainless steel.. contains: m6 Nut x 14 m8 Nut x 2 m6 Wavy Washer x 14 m8...
Handlebar clamp fixing kit in stainless steel for series 3 and Gp/Dl....
Rear floor board runner support arm fixing screw set with IVS embosed on the head and take a 14mm spanner...
Rear floor board runner support arm fixing screw set with IVS embosed on the head for series 3 li, tv,...
Headset (handlebar) Fixing kit for series 2 in stainless steel.. MB Product
Cylinder head nut for Lui 50/75 Vega and J50... Special cylinder spacer nut made by Casa Performance...
Tall cylinder head nut for Lui 50/75 Vega and J 30mm in hight. Casa B341
Inlet manifold screw in stainless steel bolt inlet manifolds with larger carbs. This bolt is designed...
Mag housing sealing plate Stud kit. The kit includes: 2 stainless steel studs. 2 nyloc nuts. 2 wavy ...
Gear selector fork M6 screw but with a smaller head, so you use a 9mm socket instead of a 10mm that you...
Side panel handle fixing set for series 1, 2 & 3.. inc: 2 screws 2 anti shake washers 2 wavy shims
Flywheel and head cowling screw kit in stainless steel that contains the correct number of hex set screws...
This kit contains the correct number of allen cap head screws and washers to fit your head and flywheel...
Stainless Square headed Bolt for fixing rear light unit to frame, Li/Sx/Tv/Lis Rear light units. 2 needed...
AF 6 plate road clutch (cassette clutch) nut & wavy washer.
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
4 slot head screws (standard Innocenti) that hold the drive side oil seal plate in place. These are the...
Brass exhaust nuts .. made in Italy by Meceur .. (sold in pairs)....
Fork buffer fixing set in stainless steel, comprising of 2 different size screws (4 for top buffers and...
Fork buffer fixing set in zink coated steel, comprising of 2 different size screws (4 for top buffers...
Headset top screw and anti shake washer set for series 1, 3 and Gp/Dl... holds the headset top and bottom...
Headset top screw and anti shake washer set for series 2... holds the headset top and bottom togethe...
MB shorty reed Inlet manifold screw in stainless steel.
Legshield end cap T nut in stainless steel. sits on the front of the legshields .. 2 needed for series...
Rear hub locking ring screw M7 thats used to fix the rear hub nut lock washer to an Italian type rear...
Rear hub nut wavy washer, especially made rear hub wavy washer for Lui, Vega and Cometa. NOT Series 1,...