\\r\\n
Clutch arm O ring, this O ring sits on the chaincase where the clutch arm drops in .... its also used...
16mm wavy washer for the Engine bolt and rear shock.
MB crankcase side stud,slightly longer that the standard crankcase stud by 4mm to allow the exhaust bracket...
Rear hub plate stud, this stud tholds the rear hub bearing plate. can also be used to convert a gp gear...
Mag sealing plate stud long nut in stainless steel...
MB mag housing stud, this stud fits in the engine case to secure the mag housing. can also be used for...
M6, Rear hub bearing stud for series 1,2,3 & Gp/Dl .. 4 required ....
Dowel that locates the end plate to engine case and also locates the chain case to the main engine case,...
4 screws that hold the drive side seal plate in place. I use these high tensile csk socket screws to...
M6 grease nipple ..correct shape, 8 needed for series 1 & 2 models, 6 needed for series 3 models....
Woodruff Key....Good quality Italian made crank shaft key, fits in the slot to locate flywheel to the...
Xtra long (45mm) M6 crank case stud, Ideal for hanging exhausts to.
Short inlet stud. 7 x 12-10-12 x 21mm in stainless steel made by MB..
Mag house bearing spacer ring for li/lis/tv/sx bearings.
Piston circlips that are suitable for all Japanese style pistons (including Wiseco) with 16mm gudgeon...
1mm piston shim used on gudgeon pins to take up end float on standard pistons. 2 needed per piston.
L shaped washer sits inside your magneto housing and holds one of the oil seals in place....
4 slot head screws (standard Innocenti) that hold the drive side oil seal plate in place. These are the...
Engine bump stop washer..this fits underneath the bump stop rubber on the engine case.
Mag housing sealing plate Stud kit. The kit includes: 2 stainless steel studs. 2 nyloc nuts. 2 wavy ...
Rear hub bearing retaining plate shim, the thinner one .. S1, 2, 3 & Gp/Dl 858
6mm MB Stainless steel grease nipple, used on some Lambrettas on the front hub backplate, the fork links...
Engine side case fixing kit stainless steel.. contains: m6 Nut x 14 m8 Nut x 2 m6 Wavy Washer x 14 m8...
Kickstart oil seal.. Fits all Series 1, 2 & 3 engines. Mb RaceTour brand..
Small mag oil seal.. Fits all Series 2 & 3 but not series 1 engines. Mb RaceTour brand..
Chain tensioner/slipper locking plate. This is used to spread the load from the two studs that hold the...
Double lipped oil seal in Viton for all versions of CasaCooler
Engine side case fixing kit stainless steel.. contains: m6 Nyloc Nut x 14 m8 Nyloc Nut x 2 m6 Flat Washer...