\\r\\n
Uni multiclutch kit, rack and pinion clutch. The multi clutch is intended to work with a modern high...
7mm spring washer in zink various uses, end plate, exhaust and inlet studs. 6 are required for the end...
6x16 set screw in zink. Used to secure standard type chain adjusters.
6x16 stainless steel set screw. Used to secure standard type chain adjusters.
6x14 stainless steel set screw. Used to secure standard type chain adjusters.
Readspeed red devil 47 tooth 6 plate clutch kit GP Type.
Readspeed red devil 46 tooth 6 plate clutch kit GP Type.
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
Rear hub bearing double row with snap ring, felt & retaining plate. especially used with AF 5 speed gearbox...
Push Up Pull Down chain tensioner. Jockey s Boxenstop
X33r PowerMaster cush drive 7 plate clutches are the first dedicated mass-produced Lambretta clutches...
47 teeth, 7 Plates - 10 Springs. No spacer required. Full CNC made in Italy by Casa Performance
46 teeth, 7 Plates - 10 Springs. No spacer required. Full CNC made in Italy by Casa Performance
Side case oil level plug for series 1,2,3 and Gp/Dl as original.. Scootopia....
Oil level plug hex key fitting type for series 2,3 & Gp/Dl.. Casa B102
Crankcase Breather/filler plug and fibre washer Casa B104
19 tooth front sprocket.. made by Mb. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46...
18 tooth front sprocket.. made by Mb. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46...
17 tooth front sprocket.. made by Mb. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46...
16 tooth front sprocket. made by Mb. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46...
15 tooth front sprocket. made by Mb. Chain Combinations: 15/46 80 Link Chain 16/46 81 Link Chain 17/46...
Magnetic Drain Plug for series 1,2,3 and Gp, Chrome plated brass, hex key fitting as original, c/w fibre...
Magnetic drain plug and fibre washer for all series 3,2 & Gp/Dl.. Casa B103
MB Layshaft with matching MB rear hub bearing & Seals complete overhaul set. Includes: Layshaft Rear...
Internal layshaft shim 0.5 mm,this shim sits between the layshaft and rear hub bearing..
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
Close 5 layshaft 1mm longer, for series 1,2,3 & Gp, these are the layshafts that can be fitted with a...
Kickstart stop allen screw cap and spring washer.. fits inside the chaincase on later Indian Gp case...
Kickstart stop allen screw This allen screw fits into the crankcase side and stops the kick-start shaft...
MB kickstart 4 piece shim set in zink including oil seal and lugged type circlip. comprising of: 1.0...
kickstart shaft 7 piece shim set Comprising of: 1.0 mm shim x 1 1.25 mm shim x 1 1.5 mm shim x 1 1.75...
MB kickstart 4 piece shim set in zink.. comprising of. 1.0 mm 1.5 mm 1.75 mm 3.00 mm
3mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
2.0 mm stainless steel Kickstart shim .. fits on kickstart shaft after oil seal and before the outer...
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
1.75 mm MB kickstart shim in Zink.. fits on kickstart shaft before the outer circlip....