\\r\\n
Jack for raising and supporting the engine when changing rear wheel....
15mm piston circlip tool for 16mm piston circlips. Casa Performance X234
35mm TMX Mikunis and 34/36/39mm Dellorto VHSB MB Leak down carb blank.
Multi purpose 8mm T handle screws. These are very useful and they can be used all the time on an engine...
Drive side crankshaft dummy bearing bush tool. Stainless steel so it won t rust This replaces a flywheel...
Mag side crankshaft dummy bearing bush tool. Stainless steel so it doesn t rust. This replaces a flywheel...
Clutch Compressor, for series 1,2 & 3. This mounts across 2 studs on the crankcase side, so it lines...
Tap ratchet T handle for larger tap sizes. 5mm to 12mm tap sizes.
Tap ratchet T handle for smaller tap sizes. 3mm to 8mm tap sizes.
Powermaster clutch Special holding tool for holding the PowerMaster STD (art. X33s) clutch in place for...
6mm stud fitting tool. Finger screw in your stud, use some loctite on the thread to be fitted in the...
8 x 1mm right hand thread fine pitch for crankshaft drive side bolt threads series 1,2,3 & Gp
12 x 1mm Left hand fine thread for crankshaft flywheel side threads.
Digital multimeter -CTM-REV "Check-202" 2V - 250V- with rubber holster, and sound buzzer when testing...
Tap, 6mm diameter x 1mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Front and...
Tap, 7mm diameter x 1mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 8mm diameter x 1mm fine thread pitch for cleaning out crank. Used for cleaning/tapping threads out....
Tap, 8mm diameter x 1.25mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 10mm diameter x 1.5mm thread pitch. Used for tapping threads out when using m8 -m10 stepped exhaust...
Tap, 5mm diameter x 0.8mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 4mm diameter x 0.7mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 6mm diameter x 1mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 3.5mm diameter x 0.5mm thread pitch, Used for cleaning/tapping threads out. Can be used for: Series...
Tap, 3mm diameter x 0.5mm thread pitch. Used for cleaning/tapping threads out. Can be used for: Series...
BGM Spark Plug socket Knurled finger grip to remove plug when hot 13mm Hexagon head so you can use a...
25 Dellorto and 26/28/30mm Dellorto MB Leak down carb blank.
End plate bearing drift for fitting the bearing into the end plate . made by MB scooters
MB Leak down carb blank, for tmx35, 28, 30, 32 Dellorto.
Assembly and disassembly tool for gear selector. Tool for fitting the gear selector on the layshaft on...
Rear hub bearing fitting and removal tool. Use one way and the tool easily pushes out the bearing and...
Drive side bearing fitting and removal tool. Use one way and the tool easily pushes out the bearing....
Engine mount (silent block) removal & fitting tool. MB
MB Leak down exhaust blanking plate ROUND type.
MB Leak down rxhaust blanking plate OVAL/BGM type.
Piston stop tool, universal for Lambretta & Vespa. Plastic ebd version.
BGM Superstrong clutch compressing tool to be used with part number TLM8011TL2
Flywheel & clutch holding tool. Granturismo
This tool is designed to remove the two fork link bushes. It s stepped to allow the inner one to be removed...
16mm piston circlip tool for 16mm piston circlips. Casa Performance X233