\\r\\n
Kickstart outer circlip in... This circlip uses extra tags which spread the load around the outer wa...
2mm Rear Hub Cone Washer/shim in stainless steel.. made by MB
2.8mm thick gearbox shim..this shim fits on top of the first gear....
Engine circlip kit contains the correct circlips to overhaul an engine including stainless steel one...
MB lazer cut kickstart shim 1.5mm thick. fits on kickstart shaft before the outer circlip.
1mm piston shim used on gudgeon pins to take up end float on standard pistons. 2 needed per piston.
1mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
Piston circlips that are suitable for all Japanese style pistons (including Wiseco) with 16mm gudgeon...
Rear Hub Cone Washer 1mm(0.9mm) Thick, in stainless steel.. made by MB
Gear selector arm circlip,, the one that holds the tie bar on .
Stainless steel washer that sits in your fork link to hold your spindle (and hub) in place Two needed...
10mm E clip used for the GP clutch arm inside the chaincasing.
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
10mm stainless steel circlip specifically used on the Lambretta front brake, rear brake, swivel and clutch...
12mm stainless steel circlip specifically used on Lambretta brake pivots and rear brake pedals.....
Mb stainless steel shim fits on the gear pivot base beneath the swivel on standard type gear pivot bases....
1mm Shim that fits on the handle bar rod to take out any play....
0.5mm Handle bar rod shim that fits on the handle bar rod to take out any play....
Gear selector arm/tie bar Stainless steel E clip.
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
MB Large clutch retaining circlip, designed by mb scooters to be a better fit.... may need slightly grinding...
Carb spacer ring for Mikuni tmx 35. This alloy ring fits into the mounting rubber first, then fit the...
2.3 mm thick gearbox shim..this shim fits on top of the first gear....
2.5 mm thick gearbox shim..this shim fits on top of the first gear....
2.7 mm thick gearbox shim..this shim fits on top of the first gear....
1.75 mm MB kickstart shim in Zink.. fits on kickstart shaft before the outer circlip....
MB kickstart 4 piece shim set in zink.. comprising of. 1.0 mm 1.5 mm 1.75 mm 3.00 mm
1.6 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
1.7 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
0.5mm crank shim to fit on the crankshaft between the crank and drive bearing, it will space the crank...
1.0mm crank shimto fit on the crankshaft between the crank and drive bearing, it will space the crank...
1.5 Crank shim 1.5mm to fit on the crankshaft between the crank and drive bearing, it will space the...
1.5 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
1.4 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel.
1.4 mm thick gear shim..this shim fits on top of the first gear....
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Internal layshaft shim 0.5 mm,this shim sits between the layshaft and rear hub bearing..
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
1.8 mm Gear Box Shim ..MB precision gearbox shim remade in hardened shim steel....