112 product(s) found for "SHIMS & CIRCLIPS"
Circlip 12mm External Stainless Steel
12mm stainless steel circlip specifically used on Lambretta brake pivots and rear brake pedals.....
Gear Arm, Clutch Arm, Brake Cam And Rear Brake Pedal Shim
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
Kickstart Piston Disc Circlip
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
Gear Cluster Shim
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
Circlip 10mm External Stainless Steel
10mm stainless steel circlip specifically used on the Lambretta front brake, rear brake, swivel and clutch...
Circlip 12mm External Self Coloured
12mm circlip self coloured specifically used on the brake pivots, clutch arms and rear brake pedals.
Circlip 10mm External Self Coloured
10mm circlip self coloured specifically used on the Lambretta front brake, rear brake,swivel and clutch...
Fork Link Locating Washer MB
Stainless steel washer that sits in your fork link to hold your spindle (and hub) in place Two needed...
Handle Bar headset Rod Shim, 0.8 mm
0.8 mm Shim that fits on the handle bar rod to take out any play....
Kickstart Shaft Shim 1.25mm
1.25 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Kickstart Shaft Shim 1.50mm
1.5 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Piston Shim 1mm
1mm piston shim used on gudgeon pins to take up end float on standard pistons. 2 needed per piston.
Kickstart Shaft Shim 1.75mm
1.75 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Gear Cluster Shim 0.2
0.2mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
Rear Hub Bearing Spacer Shim 0.5mm
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
Layshaft Shim
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
Gear Cluster Shim 0.5
0.5mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
Gear Arm, Clutch Arm, Brake Cam And Rear Brake Pedal Shim
MB stainless steel shim that can be used on the gear arm, clutch arm, brake cam and the rear brake p...
Kickstart Shaft Shim 2.0mm
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Kickstart Shaft External Load Spreading Circlip MB
Kickstart outer circlip in... This circlip uses extra tags which spread the load around the outer wa...
Handle Bar Headset Rod Shim, 0.5 mm, ST ST, MB
0.5mm Handle bar rod shim that fits on the handle bar rod to take out any play....
Piston Circlips 16mm pair,
Piston circlips that are suitable for all Japanese style pistons (including Wiseco) with 16mm gudgeon...
Rear Hub Cone Washer 0.9mm Thick MB
Rear Hub Cone Washer 1mm(0.9mm) Thick, in stainless steel.. made by MB
Crankshaft and Layshaft spacer shim, 25mm ID, 1.0mm, MB
1.0mm crank shimto fit on the crankshaft between the crank and drive bearing, it will space the crank...
Circlip Set
Engine circlip kit contains the correct circlips to overhaul an engine including stainless steel one...
Gear Shim 1.6 Lui, Vega, Cometa & J
Gearbox shim 1.6 for Lui, Vega, Cometa and J.... Casa part no 921
Crankshaft and Layshaft spacer shim, 25mm ID, 0.5mm, MB
0.5mm crank shim to fit on the crankshaft between the crank and drive bearing, it will space the crank...
Kickstart Shaft Shim 4 Piece Set Mb
MB kickstart 4 piece shim set in zink.. comprising of. 1.0 mm 1.5 mm 1.75 mm 3.00 mm
