\\r\\n
1mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
MB kickstart 4 piece shim set in zink.. comprising of. 1.0 mm 1.5 mm 1.75 mm 3.00 mm
1.5 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
1.4 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel.
MB kickstart 4 piece shim set in zink including oil seal and lugged type circlip. comprising of: 1.0...
3mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
0.5mm crank shim to fit on the crankshaft between the crank and drive bearing, it will space the crank...
1.0mm crank shimto fit on the crankshaft between the crank and drive bearing, it will space the crank...
1.5 Crank shim 1.5mm to fit on the crankshaft between the crank and drive bearing, it will space the...
Carb spacer ring for Mikuni tmx 35. This alloy ring fits into the mounting rubber first, then fit the...
0.2mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
0.5mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
1.4 mm thick gear shim..this shim fits on top of the first gear....
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.75 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.25 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.5 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
2.3 mm thick gearbox shim..this shim fits on top of the first gear....
2.5 mm thick gearbox shim..this shim fits on top of the first gear....
Gear selector arm circlip,, the one that holds the tie bar on .
2.7 mm thick gearbox shim..this shim fits on top of the first gear....
10mm stainless steel circlip specifically used on the Lambretta front brake, rear brake, swivel and clutch...
Gear cluster shim. series 1,2,3 & Gp/Dl. This shim sits between your casing and your gear cluster......
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
1mm piston shim used on gudgeon pins to take up end float on standard pistons. 2 needed per piston.
Internal layshaft shim 0.5 mm,this shim sits between the layshaft and rear hub bearing..
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
This shim can be used on the gear arm, clutch arm, brake cam and rear brake pedal.
Kickstart piston disc internal circlip. this sits in the kickstart shaft where the kickstart piston goes...
12mm stainless steel circlip specifically used on Lambretta brake pivots and rear brake pedals.....
0.8 mm Shim that fits on the handle bar rod to take out any play....
2.8mm thick gearbox shim..this shim fits on top of the first gear....
Front disc brake actuating arm circlip stainless steel.
kickstart shaft 7 piece shim set Comprising of: 1.0 mm shim x 1 1.25 mm shim x 1 1.5 mm shim x 1 1.75...
Kickstart shaft outer circlip in stainless steel
Piston circlips that are suitable for all Japanese style pistons (including Wiseco) with 16mm gudgeon...