\\r\\n
2.0 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
0.5 mm stainless steel Kickstart shim .. fits on kickstart shaft after oil seal and before the outer...
1.4 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
2.4 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
2.8 mm thick gearbox shim..MB precision gearbox shim remade in hardened shim steel....
Gearbox shim 1.8 for Lui, Vega, Cometa and J.... Casa part no 922
Gearbox shim 2.2 for Lui, Vega, Cometa and J.... Casa part no 924
Internal layshaft shim 0.5 mm,this shim sits between the layshaft and rear hub bearing..
Washer for layshaft /rear hub bearing, for Lui, Vega, Cometa Casa 931
MB Large clutch retaining circlip, designed by mb scooters to be a better fit.... may need slightly grinding...
1mm Shim that fits on the handle bar rod to take out any play....
Kickstart outer circlip in... This circlip uses extra tags which spread the load around the outer wa...
3mm MB Kickstart shaft shim. fits on kickstart shaft before the outer circlip..
0.5mm crank shim to fit on the crankshaft between the crank and drive bearing, it will space the crank...
Gearbox shim 2.0 for Lui, Vega, Cometa and J. Casa 923
MB kickstart 4 piece shim set in zink.. comprising of. 1.0 mm 1.5 mm 1.75 mm 3.00 mm
Gearbox shim 1.6 for Lui, Vega, Cometa and J.... Casa part no 921
Engine circlip kit contains the correct circlips to overhaul an engine including stainless steel one...
1.7 mm Clutch shim..MB precision clutch shim remade in hardened shim steel....
BGM Large clutch retaining circlip, designed to be a better fit.
1.0mm crank shimto fit on the crankshaft between the crank and drive bearing, it will space the crank...
Rear Hub Cone Washer 1mm(0.9mm) Thick, in stainless steel.. made by MB
0.5mm Handle bar rod shim that fits on the handle bar rod to take out any play....
Piston circlips that are suitable for all Japanese style pistons (including Wiseco) with 16mm gudgeon...
Gear swivel pivot post shim & circlip set
2mm Rear Hub Cone Washer/shim in stainless steel.. made by MB
2 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
0.5mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
MB stainless steel shim that can be used on the gear arm, clutch arm, brake cam and the rear brake p...
0.2mm gear cluster shim, This shim is used to shim the gear cluster when fitting 5 speed gear boxes.
The shim that sits on the end of the layshaft, underneath the layshaft needle bearing....
0.5 mm Rear hub bearing shim, this shim fits behind the rear hub bearing to move it out making it easier...
1.75 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
Kickstart shaft outer circlip in stainless steel
1mm piston shim used on gudgeon pins to take up end float on standard pistons. 2 needed per piston.
1.25 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
1.5 mm Kickstart shim .. fits on kickstart shaft before the outer circlip....
0.8 mm Shim that fits on the handle bar rod to take out any play....
10mm circlip self coloured specifically used on the Lambretta front brake, rear brake,swivel and clutch...
10mm stainless steel circlip specifically used on the Lambretta front brake, rear brake, swivel and clutch...