\\r\\n
Vega 20mm carburettor, This is a remade version of the now discontinued Dellorto SH20 that was originally...
Solder nipple for throttle cables. Solder fitting -UNIVERSAL- fitting Ø=3.2mm x 3mm
Extra long inner throttle cable fits mikuni, dellorto etc carbs....
Triple layered micro air filter for PHBH 26, 28, or 30mm carbs. cleanable, washable and re-usable. Also...
7mm spring washer in zink various uses, end plate, exhaust and inlet studs. 6 are required for the end...
Snake head carburettor top for Mikun TMX35, allows more easy cable routing as the cable enters from the...
Snake head carburettor top for Dellorto PHBL. This allows more easy cable routing as the cable comes...
Snake head PHBH carburettor top. This allows more easy cable routing as the cable comes in from the side...
Black 28mm DSRC (PHBH) carburettor that comes with a pull choke, 350 float needle valve, and two throttle...
22mm carburettor, This is a remade version of the now discontinued Dellorto SH22 that was originally...
20mm carburettor, This is a remade version of the now discontinued Dellorto SH20 that was originally...
Boyesen two stage reeds ideally suited for mb/bgm yamaha type reed blocks.. these won t fit AF reed ...
Reed block (reed valve) petals for Yamaha RD350 type reed blocks.
The Reed stuffer fits the BGM type Yamaha 350 YPVS and Banchee reed blocks. NOTE these are slighty different...
MB Reed Packing Plate. TS1 reed packing plate 3mm thick, designed to be used to space out a BGM Yamaha...
Mb shorty reed valve gasket (white) to suit the MB shorty reed valve assembly's and also fits Malossi...
Ts1 reed block gasket,one small and one large needed to service....
Needle JJN Suitable for Polini/Keihin/Stage6/bgm/Koso PE20, PWK24, PWK26, PWK28, PWK30.
Needle JJM Suitable for Polini/Keihin/Stage6/bgm/Koso PE20, PWK24, PWK26, PWK28, PWK30.
Needle JJL Suitable for Polini/Keihin/Stage6/bgm/Koso PE20, PWK24, PWK26, PWK28, PWK30.
Needle JJK Suitable for Polini/Keihin/Stage6/bgm/Koso PE20, PWK24, PWK26, PWK28, PWK30.
Needle JJH Suitable for Polini/Keihin/Stage6/bgm/Koso PE20, PWK24, PWK26, PWK28, PWK30.
Polini main jet pack for CP/PWK carburettor (80-82-84-86-88-90-92-94-96-98), main jets
Polini main jet pack for CP/PWK carburettor (60-62-64-66-68-70-72-74-76-78), main jets
Polini main jet pack for CP/PWK carburettor (100 -102-104-106-108-110-112-114-116-118), main jets
Polini idle jet pack for CP/PWK carburettor (42-44-46-49-52)
Polini 24mm Carburettor for use on a CP135 .. Factory set up as: main jet: 112 secondary jet: 40 slide...
Polini carb rubber for CP carburettor series with a internal size of 28.5mm
Polini 30mm carburettor kit to go with the BGM rt 195/225 cylinders. Kit comes with: : Polini 30mm Carb...
Polini 24mm carburettor kit to go with the BGM rt 195/225 cylinders. Kit comes with: : Polini 24mm Carb...
Polini 24mm cabrurettor includes cable choke (can go with the BGM rt 195/225 cylinder kits)
Small plastic holder that holds the throttle cable in position in the Mikuni 35mm TMX carb....
50 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
48 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
45 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
Rubber float bowl gasket for Dellorto PH series carburettor's. genuine Dellorto
MB Petrol tap lever adjuster/extension sleeve in stainless steel made by MB. this clever little sleeve...
Needle EN11- 58 for Mikuni TMX35 carburettors precision made by MB scooters The higher of the last two...
58 Needle EN11- 58 for Mikuni TMX35 carburettors.. The higher of the last two digits is the weaker needle...
Needle EN11- 57 for Mikuni TMX35 carburettors precision made by MB scooters The higher of the last two...
EN11- 57 needle for Mikuni TMX35 carburettors.. The higher of the last two digits is the weaker needle...