\\r\\n
Petrol tap lever in black for Gp/Dl models. made by Scootopia
Petrol tank cap with ethanol friendly rubber seal for Series 1,2,3 and Gp petrol Tanks including Oiltek...
Choke lever metal cap that sits at the rear of the choke unit..for all series 3, Gp/Dl and series 2,...
Ethanol resistant SH float needle replacement valve for Dellorto SH18/20/22 carbs.. Scootopia Produc...
SH 5899-1 Atomiser for Scootopia and Dellorto carbs. Originally fitted to LI125 & 150 S3 models... Scootopia...
SH 5899-2 Atomiser for Scootopia and Dellorto carbs. Originally fitted to Li150 Special, TV175, TV200,...
SH 5899-4 Atomiser for Scootopia and Dellorto carbs. Originally fitted to GP125. GP150, 125 Special &...
SH 5899-5 Atomiser for scootopia and dellorto carbs. Originally fitted to SX150 & Serveta Li150 models.....
Choke refurbish kit for scootopia & dellorto SH carburettors.. Kit contains 1 x plunger, 1 x spring 2...
Replacement valves that fit in the float bowl of your carb that allows the fuel to be shut off..For Dell...
Dellorto made Choke refurbish kit for scootopia & dellorto SH carburettors.. Kit contains 1 x plunger,...
Small Block 22mm inlet manifold. Fits Dell'orto SH22 and Jetex carburettors. These manifolds can be used...
22mm air hose with Ram filter & clips Will fit - Dellorto SH22, Mikuni 24/25 cARBS
20mm air hose with Ram filter & clips Will fit - Dellorto SH18/20, Dellorto PHBL 25mm CARBS
SH22 slide 7895-1 for models Gp/Dl 200 Dellorto & Scootopia carbs
7895-2 Slide for 150 models Dellorto & Scootopia carbs made by Scootopia
SH1/20 5914-2 slide for models SX150, LI150, 125 Special & GP125 Dellorto & Scootopia carbs made by ...
Long range(mid) petrol tank for S3 & Gp, comes with tank straps.. Cut outs both sides for carb fitment...
This is a fast flow fuel tap which means it is suitable for all standard and tuned engines.The tap has...
Split pin for connecting petrol tap lever to the petrol tap and the rear brake pedal clevis pin.... Two...
18 mm air intake hose for models with the SH type carbs. Fits Li125/150 series 3 & 20mm carbs (mouth...
Series 3 air hose with clips, cup, pipe & valve fits 18 & 20mm sh carbs...
Dellorto SH22 and Jetex carburettors. These manifolds are for 200cc inlet stud configuration only.
Italian Fast flow fuel tap for series 2,3 & GP rear exit version. These Are Not To Be Confused with the...
Air hose bottom spring clip that holds the cup at the bottom of the air hose in place for series 1,2...
Single half size tank rubber 40 x17 x 8. these are ideal when fitting none standard fuel tanks.
Petrol tank cap rubber seal for all standard Lambretta fuel tank caps....
Fuel tank strap trunnions set in zink for series 1,2,3 and Gp.....
Fuel tank buffer set for series 3 Li, Sx, Tv & Lis. 8 Piece set.
Fuel tank strap set including trunnions in WHITE
20mm air hose for 20mm SH and 25 mm PHBL carbs... standard on Gp/Dl 125..
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
TS1 etc R/H cut out Oiltek Long range Fuel Tank for series 3 and gp which is unique in design, as they...
Oiltek Long range Fuel Tank which is unique in design, as they are manufactured from 3mm Aluminium and...
PHBH One piece carb rubber to suit the MB shorty reed manifolds made by Malossi. This comes with the...
Ethanol resistant float for Dellorto and Scootopia made SH carbs that originally fitted series 3 and...
Fuel tap lever holder, metal replacement holder for fast flow fuel taps, replaces plastic one.
Air Hose Clip, for the top of the air hose on an 18 or 20mm SH carburettor.. and fits at the top and...
Snake head carburettor top for Dellorto PHBL. This allows more easy cable routing as the cable comes...