\\r\\n
Inlet manifold for 18-20mm size carbs These manifolds can be used on just about any cylinder, from Mugello...
MaxiFlow mega airhose for 28mm-35mm size carburettors 55mm... casa X62
Granturismo reeds and reed block gasket set.
Choke Lever Assembly for series 3 & Gp/Dl.. as per original.
Fuel tank strap set including trunnions in BLACK.
Gp Fuel tank strap set including stainless steel trunnions. for standard size fuel tanks. made by MB...
Air hose valve that fits Series 1,2 and 3 scooters in stainless steel..
Ethanol resistant float for Dellorto and Scootopia made SH carbs that originally fitted series 3 and...
50 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
48 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
45 pilot jet for Dellorto SH and Scootopia made carbs.. Scootopia product
SH 5899-5 Atomiser for scootopia and dellorto carbs. Originally fitted to SX150 & Serveta Li150 models.....
SH 5899-4 Atomiser for Scootopia and Dellorto carbs. Originally fitted to GP125. GP150, 125 Special &...
SH 5899-2 Atomiser for Scootopia and Dellorto carbs. Originally fitted to Li150 Special, TV175, TV200,...
SH 5899-1 Atomiser for Scootopia and Dellorto carbs. Originally fitted to LI125 & 150 S3 models... Scootopia...
18 mm air intake hose for models with the SH type carbs. Fits Li125/150 series 3 & 20mm carbs (mouth...
Split pin for connecting petrol tap lever to the petrol tap and the rear brake pedal clevis pin.... Two...
Flange type carb rubber to suit 22-25 phbl Fits 30mm (29 - 31mm) spigot outside diameter with one single...
Flange type carb rubber to suit 28-35 Mikuni made by Mb Scooters Fits 40mm (38 - 42mm) spigot outside...
PHBH 26, 28, 30 Flange type carb rubber to suit all Dellorto PHBH carbs 26, 28, 30mm, Mikuni 30mm and...
Snake head carburettor top for Dellorto PHBL. This allows more easy cable routing as the cable comes...
Choke refurbish kit for scootopia & dellorto SH carburettors.. Kit contains 1 x plunger, 1 x spring 2...
Carb refurb kit to fit all scootopia and 18,20 & 22mm dellorto carbs. float, bowl rubber gasket and needle...
Choke lever metal cap in stainless steel that sits at the rear of the choke unit..for all series 3, Gp/Dl...
TS1 reed block gaskets..There are two different size original TS1 inlet gaskets one small and one large,...
Snake head PHBH carburettor top. This allows more easy cable routing as the cable comes in from the side...
Snake head carburettor top for Mikun TMX35, allows more easy cable routing as the cable enters from the...
Petrol tank . designed to original drawings and powder coated in white. made by Scootopia
Ethanol resistant SH float needle replacement valve for Dellorto SH18/20/22 carbs.. Scootopia Produc...
Air Hose Clip, for the top of the air hose on an 18 or 20mm SH carburettor.. and fits at the top and...
22mm air hose (TO TAKE TOOLBOX STYLE AIR BOX).. an air hose designed specifically to fit a 22mm carb...
22mm carburettor, This is a remade version of the now discontinued Dellorto SH22 that was originally...
Throttle cable adjuster rubber, this is for standard dellorto SH and Jetex carbs....
20mm air hose for 20mm SH and 25 mm PHBL carbs... standard on Gp/Dl 125..
Mb Choke Lever Assembly for series 3 & Gp/Dl in stainless steel.
25 phbl to 26-30 phbh.. Stepped carb rubber so you can change carbs not manifolds..
Air hose bottom spring clip that holds the cup at the bottom of the air hose in place for series 1,2...
Long range(mid) petrol tank for S3 & Gp, comes with tank straps.. Cut outs both sides for carb fitment...
25mm PHBL Dellorto and 24mm Mikuni carburetors to 200cc type cast cylinders (200cc Race-Tour, Factory,...
Petrol tank cap with ethanol friendly rubber seal for Series 1,2,3 and Gp petrol Tanks including Oiltek...
MB Petrol tank cap rubber seal for all standard Lambretta fuel tank caps in viton....
Petrol tap lever in stainless steel with adjuster sleeve and split pin to suit all Series 3 scooters.....
Scootopia super fast flow petrol tap version 2. Designed with the internals of the tap to be much larger...