190 product(s) found for "Fuel & Air"
Airbox Bolt ST ST
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
Carb Flanged 32-34-36 Type Rubber Casa Performance
32 - 34 - 36mm Rubber inlet manifold for Casa Performance SS kits SS200 + SS225 + SSR250
Carb Slide 18 & 20 carbs 5914-1
SH1/18 & 20 slide 5914-1 for models LI125, 150 Special, TV175, TV200 SX200 & Vega 75 will fit both Dellorto...
Inlet Manifold 125,150,175 cylinders 18-20mm Carbs
Inlet manifold for 18-20mm size carbs These manifolds can be used on just about any cylinder, from Mugello...
Air Hose 22mm Casa Lambretta
22mm (gp200/gp150) air intake hose for models with the SH22 carb. Also fits Jetex 22/26 . Casa B39
Air Hose Clip st/st 22mm Carb MB
Air Hose Clip in stainless steel , for the top and bottom on 22mm air hoses and all hose sides that fix...
Float Ethenol Friendly
Ethanol resistant float for Dellorto and Scootopia made SH carbs that originally fitted series 3 and...
Fuel Tank Trunnion Set ST ST Mb
MB Fuel tank strap trunnion (TWO) set in stainless steel for series 1,2,3 and Gp.
Inlet Gasket TS1 pair
TS1 reed block gaskets..There are two different size original TS1 inlet gaskets one small and one large,...
Air Filter PowerFlow Casa Performance
NEW DESIGN! Casa Performance 'PowerFlow' internally-reinforced blue foam type airfilter for large carbs...
Scootopia Dellorto SH20 Carburettor
20mm carburettor, This is a remade version of the now discontinued Dellorto SH20 that was originally...
Air Filter For Polini CP Carburettors
BGM PRO air filter by Marchald- for Polini CP type carburettors Ø17.5-19-21-23-24mm, CS Ø=46mm, L=55mm...
Air filter Mesh Type S3 MB
S3 & Gp Mesh fast flow Air Filter from MB. This filter allows the engine to breathe more freely than...
Airbox Bolt
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
Atomiser SH 5899-1
SH 5899-1 Atomiser for Scootopia and Dellorto carbs. Originally fitted to LI125 & 150 S3 models... Scootopia...
Carb Mounting Rubber Stepped 22-25mm Dellorto PHBL To 26-30mm PHBH
25 phbl to 26-30 phbh.. Stepped carb rubber so you can change carbs not manifolds..
Choke Lever Cap - Cable Stop ST ST
Choke lever metal cap in stainless steel that sits at the rear of the choke unit..for all series 3, Gp/Dl...
Inlet Manifold 125,150,175 Cylinders 22mm Carbs
Small Block 22mm inlet manifold. Fits Dell'orto SH22 and Jetex carburettors. These manifolds can be used...
Fast Flow Petrol Tap With Low Warning Light Rear Exit V2
Version 2 fast flow..This is a fast flow rear exit fuel tap which means it is suitable for all standard...
Inlet Manifold Dellorto phbl - 200 casing MB
25mm PHBL Dellorto and 24mm Mikuni carburetors to 200cc type cast cylinders (200cc Race-Tour, Factory,...
Atomiser SH 5899-4
SH 5899-4 Atomiser for Scootopia and Dellorto carbs. Originally fitted to GP125. GP150, 125 Special &...
Choke Lever Assembly Gp & J50 SpecialCasa
Choke Lever Assembly for series Gp/Dl and j50 special. Casa B266
Fuel Tank Dip Stick
Petrol tank dip stick with ethanol friendly rubber seal for Series 1,2,3 and Gp petrol Tanks. Simply...
Fuel Tank Trunnion Screw S3 & GP ST ST Mb
MB Fuel tank strap trunnion series 1 & 2 in stainless steel.
Oil Measuring Bottle Mix It
BGM Mix It! Oil jug squeeze bottle, 500ml- with dosing chamber and two lids
Petrol Tank Rubber Set S3 Li, Sx, Tv
Fuel tank buffer set for series 3 Li, Sx, Tv & Lis. 8 Piece set.
Choke Refurb Kit sh22,sh20,sh18
Choke refurbish kit for scootopia & dellorto SH carburettors.. Kit contains 1 x plunger, 1 x spring 2...
