\\r\\n
3rd Oversize rear hub bearing to be used in engine casings that the rear hub bearing aperture is slightely...
2nd Oversize rear hub bearing to be used in engine casings that the rear hub bearing aperture is slightely...
Layshaft needle roller bearing. A high quality layshaft needle bearing. made by SKF
High spec MB 16x20x20 14 needle small end/little end bearing.
CP105 Crankshaft small end bearing (for cp105 cylinder kits) for Lui and J models.
CP105 Crankshaft small end bearing (for cp105 cylinder kits) for Lui and J models.
Rear hub bearing for when fitting Octopus rear hubs. This bearing uses a special thinner type oil seal...
ist Oversize rear hub bearing to be used in engine casings that the rear hub bearing aperture is slightely...
Gear cluster bearing, Ina high quality gear cluster needle bearing.
Mb reear hub bearing plate set of 3 in stainless steel .
Shim that sits behind M217 needle roller bearing on crankshaft. CASA 909
Bottom steering bearing kit for LI, SX, TV, DL & GP. Deep bottom steering kit (total cone depth is 46mm)...
Small end/little end bearing 13 roller silver caged 14x20x20
S1 & early series 2 LI & TV.Bottom steering bearing kit. : lower frame cup : bearing : fork race (depth...
Crankshaft small end bearing (for original conrods) for Lui and J models. Casa M240a
Drive Side Bearing for Lui 75/Vega and J125 4 speed casings ...
Crankshaft flywheel side bearing (for version 1 cranks) for 3 speed 50cc made by SKF.. M218z
Flywheel side bearing 6204 (early prod.) for 3 speed 50cc Lambretta J models. Early models use this type...
Small end needle bearing (for piston) Lambretta 50cc + 75cc models. NON original size measurements: Internal...
Flywheel side / Mag bearing x803 mag houses. for Lui, Vega, Cometa and J X803B
Drive Side Bearing for Lui 50 J50 J100 J125 3 speed ... M219
End plate bearing high quality for B + C + LC + J + Lui + Vega + Cometa
Crankshaft flywheel side 3 piece needle bearing for all later production Lui, Vega, Cometa and J Range...
Rear axle layshaft bearing (rear hub bearing)for all J Range and Lui Vega/Lui75 Cometa models... CASA...
Small end bearing 16x20x22mm fot GT pistons and others that require a wider bearing, Yamaha wide type....
Brass bush/bearing with oil grooves for the crown wheel,normally fitted to gp s but they can be fitted...
Granturismo Small end conversion bearing KV16x22X22 Conversion Bearing for a 22mm con rod to take a 16mm...
Rear hub bearing double row with snap ring, felt & retaining plate. especially used with AF 5 speed gearbox...
Granturismo Small end conversion bearing KV16x22X20 RB TS1 Conversion Bearing for a 22mm con rod to take...
Mb rear hub bearing O ring seal.. fits in the recess in the bearing to form a better seal..
Front Hub bearings (Fag) & oil seal set for Series 1,2,3,Gp, Lui & J
Rear hub bearing made by Scootopia. We think these are the best.
0.9 / 1.2 Mb rear hub bearing plate in stainless steel and has a recess on one side of 0.9mm recess on...
0.5 / 0.7 recessed Mb rear hub bearing plate in stainless steel
0.3mm Mb reear hub bearing plate in stainless steel and is flat on one side.
Main Drive Bearing Fag comes with extra seal fitted one side for extra protection.. fit with seal facing...
Gear cluster needle bearing...This sits in underneath the gear cluster....
High quality Clutch needle bearing.. Used as standard on Li, SX, TV models.. two needed
Gp Flywheel Brass caged bearing for all Gp/Dl type crankshafts. This bearing will fit GP taper type crankshafts...
3 Piece gear cluster bearing and bush set, comprising of: Gear cluster bearing. Bush. Shim (fits under...
Top steering bearing set for all models. 6 piece set.. From factory, these were originally fit to models...
Li/Sx/Tv crank type only, Fag flywheel bearing..
Bronze clutch bush with an oil groove machined in it...
High spec Ina 16x20x20 14 needle small end/little end bearing....